Recent content by leonelcanut

Hi, have the same issue, did you find what it was? Cheers

Hi guys! According to my scangauge I am having an intermittent fluctuation in temperature ? Wires the sensor directly to ECU, tried different ECT sensors...sometimes even the speedo needle bounces with the fluctuation...any pointers ? Thanks in advance

Hi guys! Any solution to the intermittent fluctuation in temperature ? I am having the same, even with different ECT sensors...sometimes even the speedo needle bounces with the fluctuation...any pointers ? Thanks in advance

HI Guys, hope you are all doing OK after so many years. I was wondering if any of you can tell me if I can use my original 3B block but mate it with a 4B head for example. Need to overhaul the engine and was thinking to convert it to a more modern powertrain but unfortunately for legal reasons I...

Thanks for the feedback Rosco... So you I overhaul as a stock 3B and then add turbo and intercooler? When I bouth the rig I knew the engine was in its last legs and now is blowing whitish smoke when I depress the accelerator pedal...have not opened the engine yet, but with 450K Km on the...

Well, if it could be done and if that this link says is true....the gain it is approx 50HP (seems a lot). I am not looking to gain CC but rather HP since I need to rebuild the engine anyway. Bought the car knowing the engine was not in top form and now is blowing whitish smoke when I depress the...

Unfo no, there is not, I am currently in Italy were my BJ42 is. If it was in any other place could be different. I am building a Patrol in my brother's shop in Spain with a BMW engine and also have FZJ80 in Argentina but that one does not need any engine mods. Basically what I am trying to...

So, do you guys know if you can use a 3B block but change all internals and head from a 4B ? Cheers

So, can you guys confirm you can use a 3B block with 4B head? Cheers

So, do you guys know if you can use a 3B block but change all internals and head from a 4B? Cheers

So, do you guys know if you can use a 3B block but change all internals and head from a 14B or 15B? Cheers

So, do you guys know if you can use a 3B block but change all internals and head from a 14B or 15B? Cheers

Guys, do you know if I can use a 3B bare block and use head and the rest from a 14B or 15B? Thanks!

Great info. I have a 3B in my BJ42 and cannot change the block for legal reasons. Was wondering if I could keep the block but use head, injectors, crankshat pistons, pump, etc from a newer generation engine like 14B or 15B? Has anybody tried this? Thanks!

Thanks guys for your feedback. For legal reasons I need to keep the same block but I can change all internals and head as the only thing they check is the engine denomination number casted on the block. I am trying to establish if it is phisically possible. I need to do a complete overhaul of...