Recent content by jungleman

anybody know where i can find fronts for 82 bj60? Actually i could use fronts and backs if i could get em but even a used passenger side one would cheer me up for now. any help would be greatly appreciated.

thanks guys i will set the idle higher, get some new fuel and get the injectors cleaned up. i was told to look at my valve clearances also.

I am back to fixen my 82 Diesel and I am wondering what my 3b should act like. It idles at about 500 and its rough and noisy. It has loud clackin top end. It seems to run and sound better when I give it throttle. I am still running fuel that sat last winter or longer. I just got the truck in...

Shes Running now Cruisen Now Many thanks to everybody who posted, I got her running this weekend. All it took was the new oil pressure sender and a dremel tool. I removed the fuse panel and took out every fuse, cleaned em and then used a tiny wire wheel on the...

edic thanks guys ,,,I will try the edic disconnect and check the ignition relay.

ignition relay/ glow timer I dont think my glow plug timers still hooked up as there is a homemade glowplug button and some lights installed to what used to be the glowplug ready lamp, this lamp used to gradually light up but quit working recently. The glowplugs still work but I cant tell how...

fuses I get no lights or gauge action at all, I checked the ignition switch already. I removed the fuse panel and my starter doesnt work either now so I am thinking my rotten fuse panel is suspect for sure. Is the engine fuse in the panel or under the hood? Thanks for the help.

fusable links yep i checked those two,,,are there any more?

My 1982 BJ60 wont run, the 3b starts really easy but dies right away when you switch ignition from start to run. I replaced a rotten oil pressure sending unit and tested the ignition switch. I have no guages working or lights in the gauge panel. All fuses appear ok but when I removed the fuse...

My BJ60 starts right away but dies when you let off the starter. I have no gauges powering up, this will cause the 3b to stop running because of the oil pressure circuit. Can I bypass this? Any help would be appreciated.

Greetings Everybody,,, I picked up a bj60 diesel couple weeks back, it would start easy but shut down right away, if you kept the starter on it would run. I tried new ignition switch and in the process I lost my starter circuit and glowplug circuit as well. My glowplug charge lights come on...