Thanks everyone for the assist. installed a new master prior to all this. All the wheel cylinders are adjusted correctly, I adjusted both cylinders on each cprner to where they are draggin just a little bit, any more on any of them and they get too hot. I bled them the traditional way several...
Desperately Looking for .050 oversize piston rings for a 2H engine I got from a friend, its going into my 74 cruiser. LMK if you have or know where to get a set.
Great idea/detail on this bleed process, I'm currently out of town, but look forward to trying this when I get home. I've worked on brakes for over 40 years and NEVER had this much trouble bleeding them, I've spent probably 6 hours thus far, replaced ALL the brake parts, adjusted, and adjusted...
Looking for the union adapter (there are 2, I need only 1) that connects the oil pump outlet tube to the pump and into the block, they were used on several engines including F,2F, 3F, 3FE, 5R, 5RU etc. Toyota PN 90404-60018, pic attached
Installing a 2H into my 74' FJ40 and am currently looking for exhaust ideas, I have the exhaust manifold but need everything beyond that. Anyone piece an exhaust system together for this application? I can weld/fabricate out pipes etc, really mainly just looking for downpipe/collector options to...
Installing a 2H into my 74' FJ40 and have no exhaust beyond the manifold, looking for a downpipe or exhaust from an HJ47 or I could probably modify one from an HJ60. Any other suggestions?
Without PS, and yes, I'm transplanting it into my 74' FJ. I also need the LH frame mount for this truck, it was lost at some point by the previous owner.
Not suggesting, I'm asking if anyone has experience with solid motor mounts on cruisers. I've never done too much extensive work on cruisers but I have used solid mounts on a few of my cars with no issues.
Hi, new to the forum. I'm currently restoring a 74' FJ40. I purchased the truck with the engine removed and a 2H came with it so I'd like to use that. The previous owner welded in new motor mounts onto the frame. The problem I have is the mounts aren't in the correct location to where the...