Recent content by headinghigh

Personally I would run/drive it every 7-14 days to keep all the mechanicals and seals wet with oil.you will also need to keep the battery hooked up to a decent maintence charger

Here in Australia A tophat venturi style head for a snorkel are commonly used when in the outback as the bulldust is as fine as baby powder but only usfull if you have a snorkel. Guess you could use a similar principal on a air filter box.

Between the arm rests are 4" narrower then the for to door measurement. the seat base is wider at the front as the back of the base is between the wheel arches.

*The leading edge of the back seat 53.1" (1350mm) *Door to door at window height 60" (1525mm)

No problem mate .I'll grab the other measurements when I go back out the shed later

*Back of theSeat base between the wheel arches is 43.3" (1100mm) * The narrowest point above the back seat is the roof 44.4" (1130mm) * From the front of the base of the back seat to the rear of the front seat all the way forward 13.3" (340mm) * From the front of the base of the back seat to...

What measurements do you want I can run a tape measure around if you tell me what/where to measure.