Recent content by Hans1014

  1. H

    OEM LC200.1 Steering Wheel Replacement - Toyota Alphard AHN20

    Through the years, my 2009 200 Series steering wheel has accumulated quite a few nicks and chips, both to the leather, and the wood itself. In an effort to "refresh" the wheel, tried my hardest to see if I could source a new old stock steering wheel with the exact wood trim. Turns out, my unit...
  2. H

    285/75/17 on a 40mm lift on stock 17s (2010 LC200)

    Ending my own thread! Dug through the wheel and tire thread and found this, it seems it CAN be done:
  3. H

    285 75 17 on 25 offset vs 15 offset vs 0

    Jumping in to revive the thread and just to say THANK YOU. Have been agonizing for days over this issue. Have a 2010 LC with stock 17x8 wheels at +60 offset. Will go for the 1.25 inch spacers to fit in 285/75/17s on the stock tires.
  4. H

    285/75/17 on a 40mm lift on stock 17s (2010 LC200)

    Have in my possession a 2010 Land Cruiser 200, and have recently gotten the modification bug! Didn’t want anything too crazy so I settled on an Old Man Emu BP-51 lift set at 40mm currently. Also picked up OME 2721 springs for the rear. Would very much want to retain stock 17s and simply upgrade...
  5. H

    My 1997 GCC Spec 80 Series

    This is green!
  6. H

    Wood Trim Repair/Replacement

    Hey all, doing some TLC on my 200.1, part of that involves polishing and generally cleaning up the wood trim in the car! Now I know it’s quite popular to do a wood delete, such as painting over the wood, but would (haha!) like to retain the wood trim in my unit. Are there any...
  7. H

    My 1997 GCC Spec 80 Series

    Correct, this came with the factory winch
  8. H

    My 1997 GCC Spec 80 Series

    Hi all! Not my first Land Cruiser, but the first one I fell in love with. It’s a 1997 Land Cruiser 80 Series in a GCC spec. Triple locked too. Been slowly piecing this together and restoring it through the years and I’m finally at the point where I feel happy with the progress. Sharing some...
  9. H

    Wanted USA: LC80 Gold Front Grille (53101-60140)

    That would be great! Let me PM you. To update the thread as well, managed to secure what seems to be the last gold grille in the whole of the USA. Many, many thanks @ChargedSHOTaco
  10. H

    Wanted USA: LC80 Gold Front Grille (53101-60140)

    This is great! That elusive nut turns up at last…still sold as a package I presume? Am aware of the part number for the gold grille, but it seems to be out of stock everywhere I look unfortunately
  11. H

    Wanted USA: LC80 Gold Front Grille (53101-60140)

    Whole told grille! This was available as part of the gold package I believe
  12. H

    Wanted USA: LC80 Gold Front Grille (53101-60140)

    Looking to get my hands on a new old stock/mint/good condition gold grille for an 80 series. It’s the last piece to the gold trim puzzle as it were, outside of the elusive radio antenna nut…Would love to freshen up my rig’s front end. Have been searching desperately but cannot find them in...
  13. H

    LX 570 Custom Springs?

    Sorry for the late revert. Quite frustratingly, Inkas cannot disclose any specific information on these...would have to manually measure/calculate for these by myself, but am honestly unsure how.
  14. H

    LX 570 Custom Springs?

    Confirming Inkas only swaps out coil springs on an LX570, rest of the suspension is stock. Placing here the part numbers for everyone’s benefit: SUSPLX50020 COIL SPRING LEXUS 1519 FRONT SUSPLX50021 COIL SPRING LEXUS 1519 REAR LEFT SUSPLX50022 COIL SPRING LEXUS 1519 REAR RIGHT
  15. H

    LX 570 Custom Springs?

    Resurrecting the thread once again! Have the distinct pleasure of taking ownership over an Inkas armored LX570 rated at B6 armoring level in the very near future. To my knowledge, these units come with AHC still working, with the only change being a spring swap to accommodate the heavier weight...
Back
Top Bottom