well i must say my vehicle may be old but i do not have a spec of rust on it and even areas like the diff that have bare metal exposed have not rusted . This vehicle in washed every week and polished every 2 months .I agree with what you guys think and this product is sold as an upgrade from oe...
the problem here is we are not allowed to drive on beaches and i do not have a boat and both front and back have rust and arb refer to a slip plate at the end of the blades so it should have less contact between the blades and are greaseable it still amuses me that when you read all the...
Well firstly I am in South Africa so they say they can repainted but the coating they speak of is more than likely only available in Australia so don't know how these springs would get the original coating
Had to redo all mounts over bought the sleeves to go between top and bottom I measured them back and front are the same 54 mm long and all the rest are 57 mm long od is 17 mm and I'd 13 mm after doing this the second time I realized the length of the tube determines the limit of tightening so...
I think without those clips your door glass tends to get pushed to the outside of the door while closing it and yes it is there to guide the glass back into the channel note the gap is consistent top to bottom on the leading edge of the glass that is there to solve a problem
does anyone know what the warranty is on the so called special coating on the Dakar leaf springs as mine are one year and eight months old I think my 1946 Jeep springs look brand new in comparison .any info will help
does anyone know what the warranty is on the so called special coating on the Dakar leaf springs as mine are one year and eight months old I think my 1946 Jeep springs look brand new in comparison .any info will help
Well all mounts fitted with the help of a friend some of the old rubber mounts were really colapsed The change has definitely made a differance to the ride but also has alerted me to another problem the space between the left fender and right and the front bumper are not the same about 10 mm...
i have a full set of new body mounts the originals and can't find torque settings or general fitting method and weather to use grease or is it just a dry fit any help would be appreciated
Thanks Theo I contacted outback extreme today they say they have built a bumper for this vehicle before but will let me know tomorrow. Thanks for the trouble