Recent content by FlightRisk973

Hey folks, I'm currently tackling my first-ever engine refurb on my 1989 FJ62 Land Cruiser (GCC Spec) with the 3F carbureted engine — and I’ve hit a bit of a mystery. I’ve noticed a metallic ticking noise from the engine, and I’m hoping someone here might help me narrow it down. Pouring over...

Alrighty then—found the overfueling issue. Turns out I might’ve reinstalled one of the butterfly valves in the carb upside down. Oops. After correcting that, the engine is now running pretty darn well, all things considered. I’m still tuning the carb, but without many of the proper tools—I'm...

I'm very confused, I pulled apart the engine to double-check, wear and tear and to replace gaskets. After I look at my head and block. They don't match each other. And the gasket doesn't fit either properly. But it is exactly the same gasket that was already on the engine. Did the previous...

I ended up running most of the carb parts through an ultrasonic cleaner, and it made a huge difference in removing the built-up gunk. That said, I’ve noticed something interesting—the engine seems to be racing at idle, yet none of the idle adjustment screws are even touching. This leads me to...

Perfect, I managed to put together a list. So i cleaned the carb up to prep for the rebuild since it was just covered in grim. (Parts on the way) Now I have an over fuel issue I believe. Coal rolling might be an appropriate term.

I appreciate your feedback gentlemen. The little bit of information put me on the right path I believe. I've got quite the order coming in from RockAuto all the way to Saudi Arabia. My latest issue is trying to find the correct carburetor rebuild kit. It's an Asian carb with the code 8J18...

Friends and family! First timer here with a freshly purchased 1989 FJ62 with 3F Carb and glorious 5 speed manual. The issue is simple, I cannot, despite much research, find the sensors needed for my cruiser. Coolant temp sensor has snapped off leaving a O-Shaped green connector and random wire...