Recent content by erm6266

  1. E

    1978 FJ40- external resistor

    Thank you for your support. I do have good news, I found the problem and she started right up. I checked continuity from the black/yellow wire from the ignition switch to the plug for the igniter (also black/yellow). It had continuity so that tells me no breaks in the wire from the ignition...
  2. E

    1978 FJ40- external resistor

    Thank you to all members that responded with their valuable advice. But, it seems that I have cause a riff between two members and that was sorely not my intention. For that, I will delete this thread no longer seek advice. I will figure this issue out on my own (or have it towed in to have...
  3. E

    1978 FJ40- external resistor

    Thank you! Had you confused with another member that send photos
  4. E

    1978 FJ40- external resistor

    Thanks again for your reply. When I mention "as pictured", I am referring to members that have responded to my post and provided links to photos of resistor wires, fusible links, resistor wires from the battery, etc. Please know that I am not ignoring what you are suggesting. I'm getting so...
  5. E

    1978 FJ40- external resistor

    Good idea. I will check that. I appreciate your help!
  6. E

    1978 FJ40- external resistor

    I read your post. There is a pink wire in the harness, but it's not a large 10 gauge wire. I will trace it to see if maybe it's spliced into the yellow/black ignition wire under the dash. It is not spliced into the wiring harness near the firewall under the hood as the photo you sent.
  7. E

    1978 FJ40- external resistor

    Ok, I have tested the ignition switch (new one). From what I understand from the above post, I need to test the black/yellow wire on the back of the ignition switch. With the key "on", I have 12.44 volts on the black/yellow wire. So, that tells me the ignition switch is good. As far as finding...
  8. E

    1978 FJ40- external resistor

    All great points and as you can probably tell I am thoroughly confused by all the advice. Just to let you know, my '78 has a stock stolid state distributor, no points or condenser. I assume when I use the jumper wire from the battery to the coil and the engine starts, that tells me that...
  9. E

    1978 FJ40- external resistor

    I've haven't seen a fusible that looks like that. I will definitely look for it, if I can find it. Thanks so much
  10. E

    1978 FJ40- external resistor

    If you are referring to the main engine fuse near the coil, yes. Also checked the coil fuse in the fuse box. Both good
  11. E

    1978 FJ40- external resistor

    thank you again. I will check it tomorrow. What is the difference of a resistor wire and ballast wire? Are they not the same? When I turn the key on, no voltage to the coil. If I run a jumper from the +battery to the +coil, I have voltage to the coil with the key on and It starts instantly...
  12. E

    1978 FJ40- external resistor

    I checked and not finding the pink 10 gauge resistor wire. I checked my 40 and it shows the production date of Dec 1977, but it's a '78 year model. With that production date, would it have the pink resistor wire? Thx members
  13. E

    1978 FJ40- external resistor

    Thank you for the information
  14. E

    1978 FJ40- external resistor

    Well, I looked at the photo and not seeing a pink wire. I'm I missing something? Thx again
  15. E

    1978 FJ40- external resistor

    So, the resistor is a wire now? Interesting. My issue is I have no spark. Replaced the coil and coil wire to the distributor. Also replaced the ignition switch. When I turn the key on, no voltage to the coil. However, If I use a jumper wire from the positive side of the battery to the positive...
Back
Top Bottom