Recent content by emac

  1. emac

    Yellow Zink Plating Sources

    The last place I used was (a couple of months ago) was Rochester Overnight Plating. They did a pretty good job.
  2. emac

    1982 2F running terribly. Carburettor problem?

    No stabilizer will stabilize ethanol based fuels from phase separation.
  3. emac

    1982 2F running terribly. Carburettor problem?

    It sounds like it was running fine before storage. If so, then most likely the issue is bad fuel from sitting or possibly bad points from corrosion. I have multiple cars that sit for long periods of time. I only use non ethanol fuel with stabil. I rarely have a problem, unless the car sits for...
  4. emac

    1982 2F running terribly. Carburettor problem?

    Look at the videos concentrating on the idle circuit in the carb. I had a pice of trash in mine and it wouldnt idle properly. Mine was an aftermarket knockoff pos.
  5. emac

    Builds My 1978 Nut and Bolt Frame Off Restoration

    Congratulations! You got a nice rig and happy it is still in the MUD family.
  6. emac

    FJ40 in calhoun falls

    I know this guy, but I have never seen the rig. He contacted me about selling it, just thought I would pass it along. https://www.facebook.com/marketplace/item/254907350287442/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A3e348e25-bd04-4992-92c9-abbcd20f841
  7. emac

    Score at Hobby Lobby

    found one at our local Hobby Lobby! Thanks for the tip.
  8. emac

    Score at Hobby Lobby

    Which one did you buy? :)
  9. emac

    FJ62 Horn Repair

    Cant recall the 62 horn, but many of them have an adjuster screw on the horn to tune them. Easy enough to test it.
  10. emac

    Need advice on removing thermostat housing

    May need to use a time sert/heliocoil once you extract the tap. Any chance you could weld something to the end of the tp?
  11. emac

    Replacement vac advance for electronic dizzy

    PM sent
  12. emac

    Replacement vac advance for electronic dizzy

    @4Cruisers thanks for the posts. Mine looks like the one in your last post (#7). Marshall hooked me up with one and my son stopped by his shop today and picked it up. I will post back if it doesnt work. If I decided to go with a different dizzy on my 77, do you have a suggestion?
  13. emac

    Replacement vac advance for electronic dizzy

    Thanks a lot!
  14. emac

    Replacement vac advance for electronic dizzy

    I bought one of trollholes electronic dizzy's years ago and the vac advance is not working. Anyone know where I could source another vac advance? Sent a FB message to Marshall.
Back
Top Bottom