Recent content by Dschack89

  1. Dschack89

    Wanted New Orleans, LA: 9.5 3rd

    Looking for a 9.5 3rd member w/3.73s, semi local would be cool but shipping is an option. Something like an open FJ60 third would be ideal. Gears and bearings must be usable. Thanks mud!
  2. Dschack89

    Braking Vibe

    Problem found. Its something in the rear drum brakes. Took them apart, cleaned and adjusted and the vibe goes away. Doesnt seem to want to stay in adjustment though so new drums, shoes and wheel cylinders are en route.
  3. Dschack89

    Braking Vibe

    OME 2861s, shocks and steering damper installed, noticeably better but still there.
  4. Dschack89

    Braking Vibe

    I also had that thought, if the springs and shocks dont fix it (which I dont honestly have high hopes on) then I think I'll be looking at the proportioning valve/ master cylinder next.
  5. Dschack89

    Braking Vibe

    Just off the shelf NAPA stuff for the pads, rotors and calipers. Generally pretty decent stuff DOT date is late 2015, so not all that old, and no funky wear or anything. The vibe was also there before putting the km1s on
  6. Dschack89

    Braking Vibe

    Alright mud fans, this one is driving me bananas. Thoughts, plans, heckling, etc welcome. I've got a vibe when braking from 45-50mph+, non-existent under 30mph or when cold out (like below 45* F), more of a hopping shake that rattles the dash than a brake pulse. Background on the rig: 1991...
  7. Dschack89

    For Sale CA Sacramento Fj80 suspension parts

    Details on the shocks? Miles, brand etc
  8. Dschack89

    Rock Therapy Moab Oct 17-20th

    Planning to be there the 12th-19th
  9. Dschack89

    For Sale x

    If we could work something out to get it up here I'll take it
  10. Dschack89

    For Sale x

    Ever get up into the state to the north? I've been looking for one in Oregon
  11. Dschack89

    Registry 3FE Owners Check-In

    2 methods I've used. 1- if you can thread 2 nuts on there, as close to the manifold as possible, the outer one will act as a jam nut and the stud will turn out by turning the inside nut. Reccomend using the box end of a wrench not the open end 2- get a slightly larger nut than the stud takes and...
  12. Dschack89

    Registry 3FE Owners Check-In

    Picked up my 91 a couple weeks ago w/204k. It's got a full desmog, bumped the timing up a hair, Trail Gear spindle nuts, Metaltech 2" spacers up front, unknown front springs and OME 860 mediums out back on 255/75/17 BFG KM1s. Also just installed new AC components, alternator, water pump and...
  13. Dschack89

    Parting Out 1992 HDJ81 part out

    PM sent
Back
Top Bottom