*Update*
As of today during a 4hr round trip the CEL came back on after 2.5 hours of highway driving. Checked codes once I stopped and it threw 21 and 28. Vehicle showed no difference in performance. Normal idle, normal acceleration, normal mpg. I am going to continue driving as normal and...
A little over a year ago I resorted to some older threads about CEL codes 21, 26, and 28 for my '94 80 series. Gained knowledge on those codes and I spoke to a few folks and came to the conclusion I needed new O2 sensors which I put in. Codes cleared and truck ran without issue. As of 3 days ago...
Quick update, I replaced the connection housing and the troubled O2 sensor and the truck is running perfect again. Thanks everyone for the helpful advice!
On the sensor closer to the driver side, I had a similar thought as to how it could have happened. The covering over the wires has fell apart so I’m assuming a rock or some sort of debris whacked it good.
I think I have honed in on the issue. The connection wires for the O2 sensor are as shows, open wires frayed. Next question would be does anyone know where to get a new set of wires/connection?
The two new ones I put in (part number 89465-69115) are not OEM/compatible? Would hate to toss more money on parts until I check out the other tips in the discussion.
Having a similar issue myself and will be/have been trying several things mentioned.
Truck was running fine and had Code 26 (Running Rich) show and the same stuttering and RPM issues mentioned began. I changed the O2 sensors with 89465-69115 that the previous owner gave me. The wire connector...