Recent content by cmud

  1. C

    cusred fj40

    Get a holley 1-4 psi regulator, I had the same problem. I kept blowing seals in my carb, I run it at 4 psi.
  2. C

    shocks , shaft up or down?????

    What a ugly POS, I just put Bilstiens on my bronco, I called and they said it didn't matter. I do know you don't want to mount ranchos or cheaper shocks upside down. You will love your Bilstiens :) :)
  3. C

    New fj40 owner!!!

    Thanls again, I will probably put a petronix in . I just put a carb on it, sprayed wd-40 in the cylinders, cleaned the plugs, it fired right off with starter fluid, but my fuel pump is shot, the po put an electric in, but it sounds like it,s going to explode,. I'm going to probably replace...
  4. C

    New fj40 owner!!!

    Yea, it has a three on the tree, if I get the engine running, I will contemplate moving it to the floor
  5. C

    New Metal / before and after pic's

    Hey thanks freightdog, I assume you cut out all the old metal under your diamond plate as to not trap any moisture?????? I plan on doing like you did and using some por15 on once I'm done. Thanks for the pics. :)
  6. C

    New Metal / before and after pic's

    That turned out great, I was just wondering what kind of metal I was going to use. That looks like steel diamond plate, how thick is it, was it hard to get a weld to the old metal? This is what mine looks like now
  7. C

    PTO questions??

    That's good to hear (positive pto info), I originally didn't like the whole weight idea, but now that I took it out and cleaned it all up, it's not that heavy, plus I won't have to run two batteries, I'll probably pull the cable off of my 8274 and put it on the pto and put a rope on me 8274...
  8. C

    PTO questions??

    I'm not sure about the whole pto idea, I have a 8274 on my old bronco and it has always worked great. I'll just have to use it a few times and see :D
  9. C

    New fj40 owner!!!

    Finally got pictures to show, well this is my junker, it needs a new fender, but the rest of the body isn't too bad, all interpretation I guess..
  10. C

    New fj40 owner!!!

    :doh: https://forum.ih8mud.com/attachment.php?attachmentid=15149&stc=1 https://forum.ih8mud.com/attachment.php?attachmentid=15150&stc=1 https://forum.ih8mud.com/attachment.php?attachmentid=15148&stc=1
  11. C

    New fj40 owner!!!

    Here are some pics I'm not sure if these will show :confused:
  12. C

    New fj40 owner!!!

    I live in Leavenworth, thanks. That might explain why I can't post, I took the pictures at 5 megapixls
  13. C

    PTO questions??

    Thanks, maybe I'll could keep the six, but I'm not sure if I'm willing to deal with the steering on this thing, I'll have to do some more research :)
  14. C

    New fj40 owner!!!

    I'm trying to post some pictures, but I suck at this :doh:
  15. C

    PTO questions??

    I bought a cruiser with a nice ramsey pto, the question is can you drive your rig while running the pto? Will a pto limit future modifications (small block/four speed/power steering)?
Back
Top Bottom