Recent content by Chris Terrell

What speakers did you use?

Wish I could help with that but I haven't had to explore it since my fob programmed the first time without issue. I read in another forum that other radio-type devices in the immediate area can interfere (phones, other fobs, etc.). Something to consider.

05 LX

Hi everyone, I have not been able to locate the answer to my question yet so here it is,... What aftermarket key can I purchase myself and program as a master via Techstream, assuming I have a locksmith cut it for me? I ordered a “D” chip key from Amazon and was able to program the fob but the...

thanks dnp

by loose do you mean that it rotates, or that it moves in/out? Mine rotates a bit even when tightened. Threads have blue locker on them.

I bent the tab and the situation improved. The remaining issue is with the metal retainer not staying in place. It wants to move downward when I press the switch panel into place, preventing the tab from snapping in which now exerts force upwards onto the panel, keeping the front edge propped up...

It might be a bolt. I haven't removed the assembly to see what's in there yet. On the door, there are two bolts holding the assembly in place. When attempted to tighten the top nut/bolt it turned rather easily about one turn then promptly broke off cleanly in my wrench. I need to get this taken...

I need a driver side front door check assembly. Is that something you are willing to remove and ship? If so, what do you want for it? Thanks

Tightened mine and one of the studs broke. Now I have a worse problem.

i found this ina another thread. My tab/clip needs to be back, up and in it looks like.

Hi - can anyone post some pictures of the switch assembly (especially the front metal clip), and the metal trim/retainer that sits inside the door? Mine won’t snap in and looks to me like it won’t without bending something to make it fit. I have it “snugged” in right now but it’s not flush...