Recent content by BuddyD

  1. B

    1977 BJ40 Starter 12 volt (Drive/Bendix/Clutch) or what ever is correct noun

    Rather than me getting in the middle, here's the contact info for the shop in Macon Ga. They're called Crank and Charge, phone 478-785-1500. I believe they open at 0800 EST Monday. The owner is very personable and accommodating. Not sure but I think his name is Doug and he will probably...
  2. B

    1977 BJ40 Starter 12 volt (Drive/Bendix/Clutch) or what ever is correct noun

    Not really but I'll try to find out when they open tomorrow.
  3. B

    1977 BJ40 Starter 12 volt (Drive/Bendix/Clutch) or what ever is correct noun

    I ended up taking my Bendix to a local starter shop, who in turn sent it away to a guy that actually disassembled and rebuilt the innards and welded the housing back together. Didn't look too good but works perfectly.
  4. B

    1977 BJ40 Starter 12 volt (Drive/Bendix/Clutch) or what ever is correct noun

    Follow Up - I'm adding a few pics that will hopefully trigger some input. Another data point is that there are three splines on the armature shaft that drives the Bendix and 9 teeth on the flywheel end. I hope to find a place that may be able to rebuild my Bendix, but my confidence level is not...
  5. B

    1977 BJ40 Starter 12 volt (Drive/Bendix/Clutch) or what ever is correct noun

    Trying to source a replacement starter clutch for 1977 BJ. Number part stamped on part is 028300-1340, which is apparently the Denso PN. Denso tech services contacted and said they no longer support that number, but try Toyota PN 28011-56020. Toyota vendors I contacted do not support that...
  6. B

    BJ40 Voltage Regulator Replacement 12 volt

    I used my local independent parts guy to source replacement unit. His database showed PN VR470, so he ordered one, which was a plug and play replacement(Box labeled as Intermotor Genuine Import Parts). I installed it and it appears to have corrected the overcharging issue - however I've only...
  7. B

    BJ40 Voltage Regulator Replacement 12 volt

    After removal my old eyes clearly see all 3 wires. There does not appear to be any visible damage anywhere, but it does look like a 40 year old part. Hard to see in the attached pic but with the unit disconnected top contacts are closed, and the 3 position contact is to the left post. Also...
  8. B

    BJ40 Voltage Regulator Replacement 12 volt

    Bingo! But there are only two wires coming out of VR to chassis connector (see pic), and there's a pigtail on the VR side connector that is not connected to anything? But now I can back up and revisit how to troubleshoot since I'm looking at correct part now. I was hoping when I mentioned the...
  9. B

    BJ40 Voltage Regulator Replacement 12 volt

    Here's a pic of the interior firewall passenger side. As you can see there are 3 unattached connectors. In this view top right has 3 wires, 2 black, 1 red. Top left has 2 wires, 1 black, 1 black with yellow stripe, the lower connector has 2 wires, 1 black, 1 black with yellow stripe. So...
  10. B

    BJ40 Voltage Regulator Replacement 12 volt

    Great observation AWhelan and now I'm more confused than ever. I reduced resolution on camera and was able to upload pics of Alternator and VR (at least I think it's the VR) with cover removed. I disconnected the heavy gauge wire on alternator end, and middle right terminal of what I'm calling...
  11. B

    BJ40 Voltage Regulator Replacement 12 volt

    PS - I forgot to mention that the contacts in my VR do not appear to be 3 position. They're simply open or closed?
  12. B

    BJ40 Voltage Regulator Replacement 12 volt

    After reading thru your old very informative thread and getting somewhat educated, I'm reinvestigated my existing regulator condition. I took the cover off early in this process and didn't see any obvious damage or stuck contacts, but armed with your detailed info I'm relooking. one of the...
  13. B

    BJ40 Voltage Regulator Replacement 12 volt

    For some reason pics won't load today, but I'll try again later, getting system error msg. Here's info from alternator data plate (couldn't make out all the teq #'s). TEQ 2??30-56022, ND 100210-0502, ALT 021000-263 12V, Pump 081000-034. There is one larger gauge wire that read continuity to...
  14. B

    BJ40 Voltage Regulator Replacement 12 volt

    Mr. Rudi - I'm inclined to just procure a stock 3 wire VR and wire it in IAW FSM schematic, but surely whomever made the configuration change, did so for a reason? Got tied up today and didn't get a chance to trace the 5 wires destinations yet.
  15. B

    BJ40 Voltage Regulator Replacement 12 volt

    Thanks guys! At least now I know what to look for. I've had this BJ for about 18 months and not sure whether I'm going to keep it or not. My thoughts were to keep it as near as original as possible in case I do decide to sell, but apparently it's already been modified. Hopefully I can source a...
Back
Top Bottom