Recent content by BSP

Thanks for the thoughtful response. That was something I had considered as well. I am running 20/50. However, I could not explain why only this one valve ticked during warm up. It has been doing this for several years. When I check valve lash periodically over this period, I have not noticed...

Hello All, I am experiencing some valve tick on my number one exhaust valve and cannot understand why. The valves are correctly set for lash set at operating temp. When the engine is cold, there is no loud valve noise. However, as the engine is warming up, starting approximately 3 to 4...

Hi. I’m not sure what length you need. I would use some fuel hose or something close and run it between the 2 fill plugs, then measure the length of the fuel hose to confirm. Here is a photo of the hose when installed on my fj40.

Price Update

Hi All, I am no longer using my bypass hose from transmission to transfer case. $60 for the hose and $8 for shipping. It is used, but in essentially new condition. Seals fine. This is the 12.75 inch long version. I used on 1974 4 spd to stock transfer.

I received an order acknowledgement from you by email when I placed my order. So, it is clear my spam filter is not filtering you out and you have my correct email address. That being said, I checked my spam folder and there is nothing from you there. I sent you an inquiry a couple weeks...

To be honest Matt, I would have purchased an H knob from you. However, almost a month ago, I purchased a voltage regulator from your web site. My credit card was charged. It still has not shipped. I have reached out to you a couple times by email to determine when this might ship with no...

I had a slow leak between Trans and Transfer. Decided to try Lou's transfer hose so I would not have to think about it. It is a nice product. Installs easy. Seals well.

My H knob was cracked and missing about 1/3 of its plastic. Filled it will black Milliput putty. Wet sanded with 220, 1000, then 3000 grit wet or dry. Then polished with glazing compound. Snagged some white acrylic paint from the Wife's painting supplies to refill the H. It turned out ok.

$30 for local San Diego pickup. Add $17 for domestic shipping.

FJ40 Tie Rod. In good condition. Straight. 42.5 inches long. $35 for local San Diego pick up. Will ship and add actual shipping cost to your location.

New SOR Spare Tire Cover-Black Unused (Except for photos) I believe this is their large size as it fits my 31 x 10 50 R15LT tire. $35 for local San Diego pick up. Will fit in large USPS flat rate box and ship for $22.80.

I installed a PS cooler to my 40. Used thick steel bar as a bracket and insulated cable clamps to attach the cooler to the bracket. It is very solid. Trim back the radiator shrouding a bit in the lower corner to accommodate the hoses. Use press on welting to protect the hose from the radiator...

btt