Recent content by BryanLiew

I saw the beige 80 on beadlocks on the to sea sky highway! I wanted to attend Cruiser Days, unfortunately it was the only day my friends could do Hut Lake near Squamish.

good to know, I also have 4.56! Did you do any highway driving? I'm wondering if you ever had any problems with the toybox?

Got the toybox installed. 201:1 is going to be so helpful in the 60! I still need to pick up a mini truck transfercase mount then build a skid plate/ crossmember for the toybox.

Hey BigLez, since you're in Canada I would look into Wolf Steel replacement panels! I used them when did my 60. They made fixing the rust way easier. It'll save you a ton of time! https://alfaparts.net/

I got my injectors back from being refreshed. While I was installing them and working on the 60’s interiors. My brother shortened the rear driveshaft and set it up for welding.

Got the ToyBox installed. Ran into two issues during install. The input wouldn’t fully seat at first, so I lightly sanded the H55F splines for fitment. From the research I did before starting, this seems to be a common thing. I was also missing two dowel pins between the ToyBox and split...

Cutting the output shaft! To determine the cut location, I measured the depth of the splines in the ToyBox input gear and left a small gap between the end of the splines and the bottom of the pocket for clearance. I then transferred that measurement onto the H55F output shaft and marked the cut...

I started the Marlin Crawler ToyBox install. I’ve seen some people have issues with the H55F output shaft retention where the shaft collar can shift over time. To address that, I had a new split shaft collar made with mechanical engagement into the groove on the H55F output shaft instead of...

Im pretty sure I used wolf steel and it was pretty good. you can see what I did/outcome in my build thread. I used Rockers, dog leg/rear wheel well on both sides. I am a DIY-er and have no experience with cruiser corps panels though.

Hey @joekatana can you post some photos of you hzj73 rock crawler build?

13bt bj60

Some more photos from the trip, Injust got these from the photographer who with another group

That sounds really good, I'll probably be doing something similar when the time comes!

Last year I read all you posts about the turbo upgrade multiple times! One day I'll make it happen lol. What turbo/specs are you running now?

My brother is taking care of it right now. He's going to drive it to Winnipeg in a few days.