Recent content by Brad6260

Fortunately the front windshield is fine and needs nothing.

My 93 is amazing and going strong but has way too much wind noise along with several leaks around the windows , sun roof and some cracked and wore out window trim etc. How available is essentially a complete replacement of all the window seals and is this a fairly easy job for a body shop ? Thanks.

Appreciate all the feedback and suggestions.

yep they are red. thanks

93 80 series. Need to replace a bunch of the plastic retaining clips that snap the cargo area panels in place. Anyone have a link to what I need? Similar to one in pic. Much thanks.

Great info Malleus. Thanks very much. I'll keep you posted.

Thanks Malleus, Mine is a 94 and I was hoping to find a code and have some spray cans made up at NAPA to do it myself.

How do I go about finding a color match for my 80 series front bumper color code? Here is the color. Bottom image is my buggy. Thanks for any help.

PA, We are on the same page. I ordered the clear coat spray yesterday and figure worse case I'm out some elbow grease and $50.00 bucks. My only other consideration is after I wet sand if I want to lay down a couple coats of the Duplicolor spray paint I bought. I tested it out on a couple of out...

At the risk of showing my complete ignorance on the subject how would one go about removing the existing problem clear coat and is it realistic for me to do so?

So my 93 80 series hood suffers from the notorious clear coat flake issue as so many do. I started a post elsewhere about my options and got a got an array of options and opinions. Unfortunately the obvious doing a re-paint even a cheap one is just not economically feasible so I'm looking at...

Small area ( 8"x8" ) above the front windshield also has some clear coat issue.

I can imagine the response I'll get with this but I will toss it out anyway. Just no way I can justify the repaint route in the foreseeable future and after researching ppc's comment about multi stage buffing etc there is no doubt my main issue is the failure of my clear coat. So aside from...