Recent content by Boynepark76

Do you still have the 72 seats. And if so how much?

Are there any problems with windshield frame? How much for windshield frame and are those early hood hinges?

Wow thx for all the help! The microfiche is awesome; it coincides with what I’m seeing on the different 1F engines I have. I have a 74 engine at home and will have to see what the head casting is on it. Looks like the head on my 72 got replaced with a 74 head. So, I’m thinking the original...

So I am now starting to wonder… what engine years did the 60050 head come from? I ask b/c I have 3 extra 1F engines w/ the following heads: 1969 w/ head 60030, mid-1971 w/ 60032, and mid-1973 w/ 60032. What I’m thinking is that the 60050 head was a replacement on my late-1972 engine—ie. Not...

Sold—thx Joe!

Thx. That info helps a lot. Well, I finally got the other winch off by slotting the crossmember. I didn’t want to chance cracking the pillow. Another question: I looked on SOR and not seeing replacement u-joint. I take it they not available anymore? If so, I better be careful pulling...

Another question guys: my one oem winch system is original to a 1973 w/ 3-spd and I want to put it on one of my rigs—one has a 1976 4-spd&tc and the other has a 1982 fj60 4-spd&tc. Will the 1973 winch system fit either one or will I have to modify the length of the shaft? Anything else to be...

Thx Mark. The pistons are domed. Heres pic. One can tell how Cylinders 5&6 were affected by the cracked head.

So, my 72 has a crack in the water jacket on cylinder 5 valve area (pic). Its casting is 60050. I have an extra rebuilt head with casting 60030 that came off a 1969 engine. Can I replace it with this one? Thx.

Nice thx for the info. Old jeeps also had some felt seals too… and it looks like the snap ring is on the pillow and not on the shaft like I woulda thought lol

So guys thanks for all the help. Well I just picked up another winch today locally. The pillow box is seized and I’ve started taking it apart. The manual says there’s a snap ring holding the bearing but I’m not seeing it. Plus looking like can’t get the pillow box’s seal and retainer anymore ?

Wow thanks guys! And … I saw the shear pin. In my case the shear pin had been replaced with a nail lol. I bought this 1973 rig merely for the winch and gonna rebuild it and put it on one of my 4-spd rigs. I have another one, a 1965, that also has a winch on it but the Ramsey one. So I’m...

I’m new to fj40 world and hope I’m posting this in the right place… I am trying to remove an oem winch off a 1973 I picked up about a year ago. However, I’m struggling removing the winche’s front drive shaft from the hole in the frame’s front crossmember. I would like to hear from someone who...

Can u put up better pic of the support brackets? I’ll know from the brackets it it fit my 1965. I need one. Thx

Did u sell the tailgate? And how about the tire carrier ?