Recent content by Andrest2003

Hi, just wonder if you solved this? my revs drop too. I have the same car and engine.

It was so easy... but really give me a headache :bang:;)

Well, I finally solved the problem, I bought a carburetor kit and replace everything inside, and the problem is gone also replaced the distributor bolt and set timing correctly. Thank you so much guys!

No, I haven't check that but i just replace spark plug wires too. I will check them tonight thank you.

intetesring... I will check for the advance of the advance well I havd taken apart the carb 4 times know and I suspect the problem is not there.

as far as I can see the octane selector moves when accelerating so I thing it works. but correctme if wrong... tomorrow I will check the timing again

Well, I got an update, I decided to take the distributor out and I discover the advance weights where not opening right I did the repairs there and put it back together as the manual says, restarted the engine en the problem is a lot better but there still a annoying dead spot when accelerating...

also it did not back fire, and had to use choke to start the engine this morning.

thank you guys, I just did what Micruz suggested, I use a piece of cardboard to cover the intake, and the engine stalled, did that few times but the problem still there. any other idea?

Hi, yes it does have the round headligths.

yes... I took that screw out as sample to get new ones yesterday, so that is why.

thank you, the ports on the manifold are blocked inside. I check for vacuum leaks but everything looks right the solenoid is as you said grounded to the carb body, this version has no computer onboard, but I will check again for any electrical problem just in case But sincerely I`m still lost on...

the fuel filter is brand new, and I have constant fuel flow and the float level is set right.

Oh thank you for the welcome yeah this cars really rock !!! I check the ICS it works perfect also I have no problems at idle. This really is giving me a headache :(

thank you for the response, yes I took that pic yesterday I change all the bolts the were really worn, do you have any Idea what jet could be? because I completely took it apart and cleaned up very carefully.