Recent content by AKMer

  1. AKMer

    Jegs vs GM SBC crate engine

    I currently have an HEI distributor I plan on using in the new engine.
  2. AKMer

    Jegs vs GM SBC crate engine

    I was unaware the Jegs engines were remanufactured engines. It seems prudent to me to start with a new engine rather than rebuilding my current engine. Especially where I don’t know the history of my current engine.
  3. AKMer

    Jegs vs GM SBC crate engine

    I have been slowly working on a 1973 Toyota Land Cruiser that was given to me after my grandfather passed away. There has been a Land Cruiser somewhere in the family since the 70's. Mine will never me a showpiece but I'm just trying to keep it on the trails and continue a family tradition. When...
  4. AKMer

    Transfer transmission bypass hose not working...What?

    @Captn Conch, did you resolve the issue? With a bypass hose installed it appears my transmission is low and transfer is over full like yours.
  5. AKMer

    Spindle nut socket depth?

    Thanks guys. I'll see how if I can get what I have to work. If not I'll give Kurt a call.
  6. AKMer

    Spindle nut socket depth?

    My search for a 50mm spindle nut socket from my 73 FJ40 has proven to be difficult. I took a chance with a 50mm socket for a Suzuki Samurai but it wasn't deep enough. But my girlfriends dad has offered to cut it and weld in a length of pipe to extend the socket to the right depth. My question is...
  7. AKMer

    Leaf Spring shot?

    shock off, wheel on.
  8. AKMer

    Leaf Spring shot?

    I inherited this truck. I’ve found a lot of hackery throughout with little maintenance done to anything. The gear oil in the transmission looked like Elmer’s glue when I drained it.
  9. AKMer

    Leaf Spring shot?

    Shock off, weight on the axle. Weight off the axle.
  10. AKMer

    Leaf Spring shot?

    I have a 1973 FJ40 that may have some worn out leaf springs. The suspension has very little give and rides pretty rough on the trails. The PO wasn’t much for maintenance so I’m guessing it still has the original leaf springs. They still have a bit of arch but I’m not sure what acceptable levels...
  11. AKMer

    Are these drum brakes installed properly?

    I found some of the wheel cylinders to be hard to turn or frozen with rust when I worked on my brakes. I heat/beat a few into submission. It looks like some of the return springs are not in the correct spot.
  12. AKMer

    Transmission to Transfer Case Bypass Hose

    Got my hose a few days ago. Great quality, I'm very happy. Thanks again @shipmag
Back
Top Bottom