Recent content by 93RED

  1. 93RED

    Stiff transfer case selector

    Are the cutouts in the tub same 80 to 100?...did not look like this from underneath or inside the cab. The 100 transfer case shift assy is not same as the video (80).
  2. 93RED

    Stiff transfer case selector

    Sure, a simple lube should be the first thing to try. In my case, a few treatments did not work. I could barely shift the transfer case warm with two hands on the knob. The pivot points in the shift assembly were the cause, corrosion.
  3. 93RED

    Stiff transfer case selector

    Old thread but just lending some experience. I recently had this same problem, the 100 spent its first 17 years in OH. I tried lubing all linkage from underneath and from top through the shifter access to no effect so decided to dive in. Remove center console, transmission and transfer case...
  4. 93RED

    The Age Old 100 vs 80 Debate With a Twist

    Sorry for the delay, on the way back from the beach I had to pick up an ounce before they closed...joined a protest on the way, and finally hugged a couple trees..busy day...but tomorrow I’m picking up more stickers for the Prius...excited! Stock for stock the power increase isn’t that much to...
  5. 93RED

    The Age Old 100 vs 80 Debate With a Twist

    I miss my 80...besides the seats (not as comfortable/less legroom) I think it is the better of the two. My 80 handled better on and off road, AC worked better (no leak in rear lines), braking is almost the same, engines have similar power. 80 is easier to tool on as well.
  6. 93RED

    Baja Roof Rack Fitment on LX470 100 series...quick question

    Should fit, same roofs just different factory racks. Search...there is a thread about factory rack removal discussing LX and LC differences. Fyi, I just put a Baja Rack on my ‘99 LC and had issues with the middle bracket. The bracket holes didn’t match to roof holes/nuts. Sent pics and...
  7. 93RED

    Front end clunk turning at low speeds

    Rack bushings in...noise still there on slow turns. Any other ideas?
  8. 93RED

    Front end clunk turning at low speeds

    Good to hear! Some of these shops...SMH I’ve read a diff drop can help get the CVs level when t bars cranked.
  9. 93RED

    Front end clunk turning at low speeds

    Front sway bushings all new. Tried the lock to lock once earlier but didn’t hear anything, will try again are you thinking steering rack bushings?
  10. 93RED

    Front end clunk turning at low speeds

    Hearing a pretty consistent clunk when turning at low speeds. More prevalent when center diff locked. CVs? ‘99 w/ 122k. Mine for about 3yrs now. No lift but t bars are cranked up a little. New 275/70/18s wihin last few thousand miles. No diff drop yet. Recent bearings. Drive shafts just...
  11. 93RED

    Vacuum brake booster option??

    A consistent pedal would be nice with improved stopping power. My stock 80 stopped better than my 100 does with rebuilt the MC and SS lines, factory sized tires as well. Even with heavy, emergency braking I still haven’t had the ABS activate yet. I’m all for simplicity, though that is a...
  12. 93RED

    Vacuum brake booster option??

    Good point though the idea would still apply to early 100s with no VSC or TRAC. Tundras do have ABS. The part# looks like it might apply to overseas 100s.
  13. 93RED

    Vacuum brake booster option??

    Anyone look into a vacuum brake booster option for the 100? Stumbled on this part # 44610-6A070 I was thinking since the first gen Tundra has both options that their might be a direct swap. Not sure if the stopping power would be there...
  14. 93RED

    Master Cylinder Rebuild - DIY

    Good to know but I'm post MC rebuild. Front calipers are the last on my list to go thru. Thx
  15. 93RED

    Master Cylinder Rebuild - DIY

    Two weeks on a MC rebuild (spongy/soft & sticking pedal with double pump symptoms before). Bled the crap out of her twice with one ABS activation. Pedal was definitely consistent but still soft. I adjusted the clevis out (lengthening push rod) approx 1.5 turns and pedal stiffness is improved...
Back
Top Bottom