Recent content by 2000LX500k

Thanks to all the contributors to this forum, tons of value understanding the trailer harness. I encountered a similar issue with the right-turn trailer light (not working) when trying to rent a trailer from U-Haul. After some troubleshooting, I discovered the problem was with the male 4-way...

I appreciate this post from Porter as accurate. After I finished everything in the main youtube video "LX470 Broken Ignition" For me, I was able to replace the screws one at a time for future by using a socket head cap screw 12 mm length and M4.7 spec (from hardware store). I also practiced...

Absolutely worked out. I went ahead and cut the square holes needed for the trim. To cut them, just use a regular drill bit and a file to make it square after using a piece of paper as a template drawn from the old fender. Its pretty straight forward. Frankly, you could skip the whole exercise...

It is in process. Here is one of my photos. I will let you know what happens once I finish the paint job. The holes I made seem to work well with the molding. I just used a regular drill and a file to make the cut outs. Thanks for commenting about the bumper. I had no clue they were that...

I will attempt this very thing and post my results. Taking off the damaged LX fender (already purchased the LC fender). I will reply to this post with status of how I created the holes in the new LC fender for the LX cladding.

I have a Side Step on mine. So I watched this video: to figure out how to remove the side step since my fender wouldn't come off. Now I am thinking I need to take it off. I cant figure out why the lower trim is holding on the fender. I will post some pictures when I get a chance.