Chrome.webp

Parting out 60-series Yard Sale

$500.00
Item Condition
Fair
Shipping?
Pick up only
Toyota 60-series

Details

I have lots of old parts laying around, and a few newer parts. I just need room for projects and to quit looking like a hillbilly, so I'm looking to clean house (or my carport to be exact). Since the goal is to make room and clean things up, I'm listing for cheap and am not interested in shipping unless it's smaller and can fit in a flat rate box. If you really want a thing maybe we can talk. I could potentially be persuaded to deliver locally around central AZ depending on location and brewery availability. I can provide pictures upon request.

FJ60 stuffs...
  • OCT 1985 H42 4spd tranny. This is the later model that has a spacer to match the length of the H55f. When I pulled it from the truck at ~135k mi. it was quiet, shifted smoothly, and had no issues. Pulled it simply because I was putting an H55f in instead - $500 OBO
  • Factory 1986 FJ60 ring and pinion gears for both axels - $75 OBO for both
  • Factory 1986 gear carriers for both axels - $75 OBO for both
  • FJ60 center console in grey, good condition - $75 OBO
  • FJ60 grey AC bezel, looks OK but has some cracks and busted screw holes - $Come and get it!
  • D.U.I Distributor and FJ60 wiring with a relay, works great I just preferred to have the sealed FJ60 system. This was installed with my Sniper and was on the truck for maybe two years - $100 OBO
  • Cruiser Corps grey vinyl front seat covers in good condition. I have a matching rear, but it is currently installed and would take me a minute to switch out with the fabric rear seat upholstery I have - $Come and get em!
  • Cruiser Corps dash cover. It has a small factory defect crack on the right side of the instrument hump, they sent me a new one but this one could be fixed with ease, or run it as is - $Come and get it!
  • 15" chrome rims x4 with a bit of surface rust. 31x10.50 BGF's installed, they have good tread but are getting a bit old - $100 for all 4 or OBO, see also the rims off my FJ40 below...
  • Warn winch tray and bumperettes - $Come and get it!
  • Factory smog s*** minus the smog pump. Probably going to the scrap yard since I'm betting no one wants this, but figured I'd put it here just incase someone needs it for a resto in a smog state - $Just get it out of my way!
  • 1986 OEM carb in excellent condition. Was never re-ported/jetted after the truck was de-smogged, but worked beautifully before I installed a Holley Sniper - $250 OBO seem OK?
  • 1986 OEM exhaust manifold - $Come and get it!
  • FJ60 OEM rear chrome bumper in OK condition - $Come and get it!
  • MAYBE an OEM fuel tank. This was replaced under warranty a few years back and then I got a LRA tank. I say maybe because I might consider using it as an aux tank on my FJ40, if someone is interested I'll do some measurements and either s*** or get off the pot with that idea, so lets talk.

FJ40 stuffs
  • 1974 OEM front seats in rough but restorable condition - $Come and get em!
  • 1974 OEM side facing rear passenger bench seat, needs lost of TLC and some welding - $Come and get it!
  • Early tyre carrier. This is the old style, not the newer tubular and mine is for the drivers side. Hinges are shot but I purchased the CityRacer upgrades which I'll include - $125 OBO
  • Those CityRacer hinges separate? - $125 - Yes, I really want the tyre carrier to go away too!
  • CCOT 12.5gal poly tank. This is the one that goes under the passenger seat inside the vehicle - $50 OBO
  • UNK year 2f carb, needs help - $50 OBO
  • 1971 (I think) F intake manifold - $Come and get it!
  • 1974 Transfer case, needs new seals and gaskets at the very least, bearings couldn't hurt - $100 OBO
  • OEM 15" black rims x5 with some abused hubcaps. The front donut hubcaps are in good condition, the three solid hubcaps have kissed rocks (and one has a crack). Rims themselves are in good condition - $500, see also the chrome rims listed under my FJ60 stuff.
  • FJ40 Fiberglass roof, very rough condition (though fairly intact). I'm not gonna charge a penny for this, you just gotta have a deep longing for a lost cause...
I need this s*** gone, and I have some other small bits and bobs scattered around so don't be afraid to ask. Certainly nothing compared to a parts shop, but lordy I've accumulated some s***.

Thanks!
Clark White

EDIT: I apologize if this isn't quite the right place for this, but I can't find a junk collection/yard sale section to post this?
  • Chrome.webp
    Chrome.webp
    193.8 KB · Views: 171
  • OEM Rims.webp
    OEM Rims.webp
    202.2 KB · Views: 16

Comments

This was a nice ad. So many people forget to price everything or describe the parts accurately. I wish I was in AZ to take some of it off your hands. Good luck with your cleaning house.
 
Factory 1986 FJ60 ring and pinion gears for both axels - $75 OBO for both

Not needing anything else. Lucky I have garage and RV parking to hide my hillbilly parts. Probably fairly local in central AZ.
 
@vipergrhd here are some pics of the carb in question...
PXL_20260714_044029265.NIGHT.webp


PXL_20260714_044037072.NIGHT.webp


PXL_20260714_044046695.NIGHT.webp


PXL_20260714_044100163.NIGHT.webp


PXL_20260714_044118587.NIGHT.webp


PXL_20260714_044321560.webp


PXL_20260714_044142943.NIGHT.webp


PXL_20260714_044203714.NIGHT.webp


PXL_20260714_044237000.NIGHT.webp


Clark

EDIT - This is still in the full smog configuration, while the truck was otherwise de-smogged the carb was never touched. I'm of the understanding that if you have de-smogged the truck then your dizzy needs adjusted and the carb needs re-ported and jetted.
 

Classified ad information

Posted by
midknightc3
Feedback score
+0 /0 /-0
Category
Parting Out
Views
129
Comments
4
Location
Central AZ

More in Parting Out

Back
Top Bottom