3FE Vacuum Schematic Needed - '88 62

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

PabloCruise

PabloCruise

SILVER Star
10 Year 15 Year 20 Year
Joined
Jun 3, 2004
Threads
509
Messages
27,076
Location
Northern Colorado
I am trying to sort out issues with a 3FE from an '88 62.

I need to confirm my vacuum lines are as they should be.

My '88 FSM does not show all vacuum connections, esp related to the fuel pressure regulator.

Does anyone have a complete vacuum schematic for the 3FE?
 
slcfj62 said:
https://forum.ih8mud.com/60-series-wagons/213530-how-many-feet-vacuum-hose.html

See post #5.
Click to expand...

Wow, awesome!

Here are some I have collected in order of good, better, best:
048H3.gif
3FE vacuum.webp
fj62%20vacuum%20piping.webp
 
2mbb said:
In the FJ60 that filter connects to the distributor cap. It is installed from the inside of the firewall under the glove box.
Click to expand...

Interesting! I wonder why they do not show the other dizzy vent lines...

Thanks
 
There should be a metal plate with the diagram on your driver's side firewall up near the top if I'm thinking correctly.
 
PabloCruise said:
Somewhere there is a lonely little FJ62 with a metal plate on its firewall - minus the 3FE that is in my FJ55!!!

Thus my quest for info...

Thanks,
Click to expand...

Sorry to hear that your 55 doesn's have the metal plate. pm me your phone number and I'll take a cell phone picture of it in 1 hour and send it to you.
 
Pictures emailed to you.
 
So I marked the diagram up a little to check the individual circuits for continuity, and also to make the changes to my circuits for Evaporative Charcoal Canister.

I also tracked the circuit for Fuel Pressure Regulator. It connects to the gas valve on the intake.

My hope is that this will help future searchers...

How the F does the gas Valve work, and how do you test it?
3FE Vacuum 001.webp
 
You must log in or register to reply here.

Share this page

Back
Top Bottom