You're going to hate me...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 7, 2015
Threads
3
Messages
35
Location
28409
Alright guys I'm all in for the 350 swap, I've got 2000 escalade 5.7 motor, downey adapter, I'm ordering the Howell harness. My question is what motor mounts have you used/recommend, and what external fuel pump? I really hope it's as easy as you guys make it sound. Also is anyone looking for a running 2f? It has 218k miles on her, and wouldn't hurt to freshen it up. Thanks for any and all info!
 
advance adapters is what I used on my 5.7 for the motor mounts, also I use a walbro external fuel pump....both of which I've not had any issues with.

V8 swap make the most sense.....its a clear sign you are a genius :)
 
first course of action is do you have to comply with emission rules on engine swaps where you live...thats going to dictate some of your approach in your swap.
 
Walbro GSL392 is what I'm running. '96 5.7 vortec. I have had to replace it and I don't trust its longevity so I keep a spare in the truck. One failed on me on the way to Grand Tetons NP this Summer and while it was a mess to change on the side of the highway I was glad to have a spare! PO had to replace approx annually and I am on that same pace. In tank fuel pump is on my short list.
 
first course of action is do you have to comply with emission rules on engine swaps where you live...thats going to dictate some of your approach in your swap.
I live in N.C. and my brother just happens to be an inspector, so the rules don't apply
 
Thanks
Walbro GSL392 is what I'm running. '96 5.7 vortec. I have had to replace it and I don't trust its longevity so I keep a spare in the truck. One failed on me on the way to Grand Tetons NP this Summer and while it was a mess to change on the side of the highway I was glad to have a spare! PO had to replace approx annually and I am on that same pace. In tank fuel pump is on my short list.
Thanks for the info!
 
Good luck with the swap! We've got our NC TLCA club called Olde North State Cruisers if you need help in your area! We've got a few people down near Wilmington:

forum.ih8mud.com/forums/nc-olde-north-state-cruisers.54/
 
Awesome! I'm sure I'll be needing some help along the way. Is your group a seperate forum or Facebook?
 
Good luck with the swap! We've got our NC TLCA club called Olde North State Cruisers if you need help in your area! We've got a few people down near Wilmington:

forum.ih8mud.com/forums/nc-olde-north-state-cruisers.54/
Never mind my ignorance, I just saw the link
 
I have ram horns. from looking at mine I think stock manifolds would work although the center output of the ramhorns could pay clearance dividends over the firewall adjacent output of the stock manifolds. I think the main driver for ramhorns is they have some flow improvement over stock. And don't have the fitment or sealing issues of headers. Can't speak directly to experience with stock or headers though. At least on the 60. I've had trouble keeping up with exhaust leaks on headers on past trucks.
 
I have ram horns. from looking at mine I think stock manifolds would work although the center output of the ramhorns could pay clearance dividends over the firewall adjacent output of the stock manifolds. I think the main driver for ramhorns is they have some flow improvement over stock. And don't have the fitment or sealing issues of headers. Can't speak directly to experience with stock or headers though. At least on the 60. I've had trouble keeping up with exhaust leaks on headers on past trucks.
Thanks for the info! After I set the motor in I'll see what it looks like with the stock manifolds, if that doesn't work out I'll def go ram horns. Building on a budget sucks!
 
Okay guys this is where I've made it to. I made a motor swap rookie mistake and didn't think about what clutch and flywheel setup I would need to hook my 5.7 to the stock 4speed. What do you guys recommend?? Huge thanks to you FJ Gods!
0812162101.webp
 
Out of curiosity, where do you source the engine. I've put a little over 3k into the "V8 swap fund" and am looking for a reputable source.
A friend got rear ended in his escalade that got totaled. It had 140k on it and when he told me he was parting it out I got lucky and snatched up the motor. Good luck with your swap! Feel free to message me with questions when you get started. Hopefully I'll have all the kinks worked out of mine and can be helpful.
 
Advance Adapters makes a bellhousing to go from SBC to Toyota and sells a clutch to go along with it. In addition, you can also do a Ranger Overdrive to get longer legs for the highway.

AA is where you should look :cheers:
 
I use the stock GM flywheel...168 teeth as I recall for my 99 version of the 5.7 vortec, I run the center-force clutch and pressure plate recommended that works with the marks adapter. The stock 4 speed transmission is going to be limiting for a DD.
 
Back
Top Bottom