Worst Fears Realized!!!!!!!!!!!!!!!!!!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Blackdog

"Y'all smell that?"
Joined
Jan 3, 2008
Threads
37
Messages
517
Location
Next to the particle accelerator
Been living in denial for a long time now, but I finally conceeded that my coolant wasn't dripping out on the ground. I suspected it for some time now, but finally broke down and went to see my 'Yota Doctor to have a pressure test done. He said he could do it first thing Monday. I told him I might be able to save him the trouble if he could "take a quick look at something". I opened the hood and as I reached for the oil filler cap he confirmed what I had been fearing. "There is yellow grease on the inside of the cap, right". "You have a blown HG" :doh:. He called the local stealership (Hoover Toyota) to price a HG kit and told me what I expected.......over $300 just for the gasket kit. I knew it was gonna be a chunkachange, but I figured I could do better on the kit price. It's no wonder who I called next....CruiserDan. He quoted me less than $220 including, as he explained to me, the gaskets and Orings that are not included in the rebuild kit. Super nice guy,Dan is. I just hope my cruiser doesn't lay down on me before I can put together the cash to get it worked on. Summer's comming fast in the South and I know if anything is gonna push a leaking HG over the edge, it will be an Alabama heatwave.
Alot of you guys have already took this walk, so is there anything I should be aware of before, during and after the teardown? I trust my mechanic to do a good job. He knows Toyotas inside and out. He's an independent shop owner who specializes in toy/lex. and spent about twenty years as a dealer mechanic.
Any thoughts?
 
SERIOUSLY go to the FAQs and do some reading. IDAHODOUG is the person you want to talk to about getting the DVD. Do it right the first time.
 
Blackdog....get the parts, some brew, and the Idahodoug dvd...post up a date on the Dixieland Cruiser forum and we can all learn how to do a HG job and we can lend a hand.
 
If you have local Cruiserheads volunteering to help, then do it. The dealer is going to rape you on this one. They already tried to on just the parts. Get IdahoDoug's DVD, some buddies, and dig in. Working on these things is not voodoo, and you won't learn any other way.

Tony
 
Would love to do this job myself. If not to save the cash, then to just have the experience of doing it. The problem is this is my DD and I have neither the time nor the place to tear it down. I am confident that I could do the job if this were a second vehicle. I guess that I should count myself fortunate that I was able to get 262k before she started to leak. I am still driving her (cautiously and locally) till I get $$$ for the job. I have had her for two years and have put 'round 60k on the clock myself. I'm sure after this she'll be good for another 300k.
 
FYI,

Coolant in the crankcase plays hell on the bearings...You better get the work done sooner than later...
 
newb alert: Are those head gasket sealers you pour into the radiator any good in a situation like this, like for a temporary fix?
 
newb alert: Are those head gasket sealers you pour into the radiator any good in a situation like this, like for a temporary fix?

Anything, let me say that again ANYTHING that claims to seal leaks, whether coolant, oil, tranny fluid, diff fluid, cure rod knocks et cetera is SH*T!

Head Basket in a Bottle...would be nice. So would Rod Bearings in a Bottle. Alas, that goes the way of crystals that will give you better fuel econ and Vornado thingies to do the same.

If you've got a problem...ya can't cure it with $8.50 and "pouring it in." Sorry-blood, sweat and beers!
 
mine is showing no signs of a blown hg but im leery about al hot humid summers.

Good luck!
 
Anything, let me say that again ANYTHING that claims to seal leaks, whether coolant, oil, tranny fluid, diff fluid, cure rod knocks et cetera is SH*T!

Head Basket in a Bottle...would be nice. So would Rod Bearings in a Bottle. Alas, that goes the way of crystals that will give you better fuel econ and Vornado thingies to do the same.

If you've got a problem...ya can't cure it with $8.50 and "pouring it in." Sorry-blood, sweat and beers!


You'd be amazed how often those radiator crystals actually DO fix a small leak in a radiator. Not all of these products are junk -- there are many documented cases of these products stopping small leaks.

That being said, many leaks, and especially significant ones cannot be fixed with additive. I have used StopLeak power steering fluid on two vehicles. It worked on one, and did nothing for the other.

I'd roll the dice on a leak stopping additive for many applications, but I'm not sure about the head gasket. If I were sure I had a small HG leak and was even able to stop it with an additive, I'd always be nervous driving the truck up a mountain pass or towing anything.

The additives are cheap and it may even work in your case, but I would never consider it a tough, permanent fix for something as vital as a headgasket -- not in an 1FZ.
 
You'd be amazed how often those radiator crystals actually DO fix a small leak in a radiator. Not all of these products are junk -- there are many documented cases of these products stopping small leaks.

That being said, many leaks, and especially significant ones cannot be fixed with additive. I have used StopLeak power steering fluid on two vehicles. It worked on one, and did nothing for the other.

I'd roll the dice on a leak stopping additive for many applications, but I'm not sure about the head gasket. If I were sure I had a small HG leak and was even able to stop it with an additive, I'd always be nervous driving the truck up a mountain pass or towing anything.

The additives are cheap and it may even work in your case, but I would never consider it a tough, permanent fix for something as vital as a headgasket -- not in an 1FZ.

IMO, no matter how large or how small of leak. The leak is a problem, If the component failed then the component should be replaced not band aided.

BTW: Im not made of money at all and it really does hurt when issues arise. Mud has saved me tons of $$. I prefer the do it the right way ($$ or none) once and she will thank you.
 
My predictions:

1 - pay the mech) Takes your mechanic 5 days to do it. 1.5 for removal. 1 with your head in the machine shop. 1-1.5 install. Cost you around $1k in labor on the cheap side. How are you getting around?

2- cruiser pals help) Takes 2 days to do it. Head off by lunch and taken to the machine shop. Head in your hands by lunch the next day and installed by 10pm. Costs you ~$250 for the machine shop to surface the head and ~$50 in :beer: and pizza.
 
I'm with Alkaline. My first ever HG took me a full day to take it off and a full day to put it back on. Your DVD is on the way today, and I think you can do it. Particularly encouraging is that you are aware of it before it seriously blew and did damage overheating the head. So you'll be in the "remove, slap on a new gasket, and replace" crew. Good job.

Keep the revs low and the loads on the engine low.

DougM
 
Thanks Doug. Looking forward to seeing this DVD everybody talks about. I'm on the way to Publix to pick up popcorn and beer.
 
Back
Top Bottom