windshield removal ???

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I would soak them down with PB Blaster first. I would reapply every day for a couple of days or longer. When I did mine, I did this for about a week and I was able to get about 1/2 of them out. More PB Blaster and I got a few more out. The rest I had to drill/tap. If you have any reverse drill bits, this is a good application. Impact with the right size bit is seems to be the tool of choice.
 
Shot of Kroil, then use an impact tool. It's a hand tool set to rotate upon impact with a hammer either to tighten or loosen. Don't forget to use #3 phillips. Never fails.
 
Shot of Kroil, then use an impact tool. It's a hand tool set to rotate upon impact with a hammer either to tighten or loosen. Don't forget to use #3 phillips. Never fails.

I agree with the above. Its worked for me even when impact failed. Be sure to have the unit set for the correct direction!
 
Back
Top Bottom