Will this front axle combination work?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 8, 2005
Threads
64
Messages
424
Location
Southwest
Just like the title says. Will this bolt together without issues?:

- front axle housing from a 69 fj40
- knuckles/arms from a solid axle mini truck or fj60/62
- birf/axle assemblies from a solid axle mini truck
- oem hubs from a solid axle mini truck or fj60/62
- pumpkin from fj60/62
- brake discs from an 81 fj40
- brake calipers from a 86 IFS mini truck


Also are fj60/62 pumkins all 4:10 like the 69 fj40?
THANKS!!!!
 
you wrote:
- front axle housing from a 69 fj40
ok, uses inner axle seals ...

- knuckles/arms from a solid axle mini truck or fj60/62
the tapers for the tie rods will be larger than a 40 series so is you have saginaw or want to mess around with mix and match you can make something work

- birf/axle assemblies from a solid axle mini truck
birfields work with grinding on axle tube outer to make the fit. inner axles are NOT going to work- use the 1969 inner axles if you still have them

- oem hubs from a solid axle mini truck or fj60/62
the spindles are mini/60 series right, then spacing all the same. two hubs, 1979-1980 and 1981+ they just use different rotors

- pumpkin from fj60/62
a 60 series is 3.70:1 (37 & 10 teeth) a 62 is 4.11:1 (37 & 9 teeth)

- brake discs from an 81 fj40
rotors right? your hubs dictate the rotors, "1981" are the two bolt + 6 lug stud anchor types (although OE toyota replacements don't use 2 bolts anymore)

- brake calipers from a 86 IFS mini truck
1986 IFS calipers are equal to all LC 1979-1990 calpers (vented rotors, mini truck solid axle use solid rotors)
 
Yes I think I can mix and match the tie rods etc. Why won't inner axles work? Assuming I get a fine spline fj62 4:10 pumpkin I thought that the inner axles would work. I think they are the same length?


you wrote:
- front axle housing from a 69 fj40
ok, uses inner axle seals ...

- knuckles/arms from a solid axle mini truck or fj60/62
the tapers for the tie rods will be larger than a 40 series so is you have saginaw or want to mess around with mix and match you can make something work

- birf/axle assemblies from a solid axle mini truck
birfields work with grinding on axle tube outer to make the fit. inner axles are NOT going to work- use the 1969 inner axles if you still have them

- oem hubs from a solid axle mini truck or fj60/62
the spindles are mini/60 series right, then spacing all the same. two hubs, 1979-1980 and 1981+ they just use different rotors

- pumpkin from fj60/62
a 60 series is 3.70:1 (37 & 10 teeth) a 62 is 4.11:1 (37 & 9 teeth)

- brake discs from an 81 fj40
rotors right? your hubs dictate the rotors, "1981" are the two bolt + 6 lug stud anchor types (although OE toyota replacements don't use 2 bolts anymore)

- brake calipers from a 86 IFS mini truck
1986 IFS calipers are equal to all LC 1979-1990 calpers (vented rotors, mini truck solid axle use solid rotors)
 
short side front axles for:
40 series 1968+
60 series
70 series pre 1990
all the same.

long side front
same for
70 series pre 1990
40 series 1968+

mini truck short
nothing other I know of (or care to)

mini truck long
same as 60 series
 
Back
Top Bottom