Wich carburator?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 12, 2006
Threads
16
Messages
238
Location
Bologna, Italy
Website
www.fuoristrada.it
I sent an email to cruiserparts.net asking for a Weber carubrator to increase a little bit power and torque of my F engine; they answer that by now they don't have any Weber (with related installation kit) and they said that tha original carburator is vary good...

So what you suggest me? they have also a Rochester carburator? Do you have any other idea about this?

Francesco
 
I understand that the stock carb is best suited to the vehicle.
I have run Webers on various 4-cylinder Yotas with good results.
I believe the Webber will not give you all you are looking for.
It is the only option I would consider however besides the stock Asin.
No Rochestors, or Holly's, they will not do angles without choking out!
DON'T DO IT!
 
I've got a Rochester, rebuilt it last year. It's pretty darn good for flat and level, but you really can't beat the stock carb for all-around performance and durability, unless you upgrade to a Holley 4 barrel:grinpimp: A friend has a perfectly stock 1969 FJ40 with the three-on-the-tree and a 2F equipped with a Holley 4 barrel, it'll smoke the tires in 2nd gear. Best bet though, stick with stock.:cheers:
 
I ran the 32/38 on a modified F motor an it ran great. Considerable power difference from the Rochester. Both my 40's came with after market Holley's when I got them so I can't comment on the difference of the orginal equipment. I tried the Rochester after someone pushed me to get it only to change it out with the Weber. The 67 I just purchased has a brand new Holley but when its time to revive the engine with a rebuild I will go with the Weber. I purchased my 32/38 kit from manefre back in 97 and I see they are still selling them. I gotta think someone's happy with them. Anyone wanting to swap a weber for a Holley just let me know.
:beer:
 
So I see that you all guys agree at all...:rolleyes:

A forum user offered me a Weber from his 1977 FJ 40, what do you thing about it? To me is what I was looking for, but I've never tried a similar carb on my car.

Francesco
 
Francesco_from_Italy said:
So I see that you all guys agree at all...:rolleyes:

A forum user offered me a Weber from his 1977 FJ 40, what do you thing about it? To me is what I was looking for, but I've never tried a similar carb on my car.

Francesco

I think it would be a good pick up for you, but that's just my opinion.
Is it the 32/36 or the 32/38? Hey if you don't get it from him let me know, I'll take it.
 
I asked him for some more information, but a 32/36 I think that wouldn't be enough (here in Italy the A112 Abarth, a 1100 cc, used to mount a 32/34).

I'll post some news about it later...:grinpimp:

Francesco
 
Pin_Head said:
Webers were good enough for Enzo Ferrari.

Enzo Ferrari never made offroad vehicles.

:D


Also, keep in mind that a Ferrari's motor needs to be overhauled MUCH more frequently than, say, a Toyota, or even a GM motor. (IIRC, one thing I read said that the motor had to be overhauled every 30,000 miles, but that might have been the Lamborgini Miura).
 
Tigerstripe40 said:
Enzo Ferrari never made offroad vehicles.

:D


Also, keep in mind that a Ferrari's motor needs to be overhauled MUCH more frequently than, say, a Toyota, or even a GM motor. (IIRC, one thing I read said that the motor had to be overhauled every 30,000 miles, but that might have been the Lamborgini Miura).

The only thing I agree with is the statement on Ferrari never made offroad vehicles. I've worked on both Ferrari and Lamborghini V12's and none of them had to be rebuilt or overhauled after any certain mileage. I've seen some with 50 - 70 - and 100K on them. Of course these cars were maintained the way they were suppose to be by the shop I worked for. Lamborgini did make an off road vehicle the LM001 and LM002 which the later performed very well. Of course you know the heritage of Lamborgini was farm tractors. ;)
 
Francesco_from_Italy said:
I asked him for some more information, but a 32/36 I think that wouldn't be enough (here in Italy the A112 Abarth, a 1100 cc, used to mount a 32/34).

I'll post some news about it later...:grinpimp:

Francesco

The 32/36 they run on a stock platform. The 32/38 is more for the modified motors cam/headers/ignition/open exaust etc. Has anyone run the 32/38 on a stock motor, I'd be curious my self to know wether you can choke it back enough not to run rich.
 
Pin_Head said:
Fiat and Alfa Romeo used Webers too as did Porshe. They are a good carb, but they are not designed for off road applications.

Your right, and don't forget the Triumph TR6 but don't tell that to the offroad Baja buggies running volkwagen plants and dual weber setups. I've seen those guys jumping sand doones as tall as my house, and no I'm not in a FEMA trailer.
 
I had a weber on my F and i could not get it to run lean (always ran rich). i would definitely use an Aisin if you can. just my opinion and experience.
 
Back
Top Bottom