White smoke

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 6, 2010
Threads
25
Messages
83
Location
Kenya
Dear Members,

I am a recent HDJ-80 owner, JDM spec VX 12 valve 1995 model, I love the car and i drives great, nice power too.

Only issue is I get white smoke, a little at start up but more during low end acceleration and idling in traffic. The smoke comes between 1000 and 1900 rpm and I have noted:

- Car does not consume excessive oil
- Car does not consume coolant
- Power is good and so is throttle response
- Injector nozzles were changed by previous owner one year ago
- Smoke comes even when the car is warm

Please let me know if anyone has experience with this issue, I doubt its the rings or valve seals, I suspect its a fuelling issue at acceleration and low rpm.

Thanks
 
Sounds like unburnt fuel. Might get more answers if you put this in the deisel tech area
 
Dear Members,

I am a recent HDJ-80 owner, JDM spec VX 12 valve 1995 model, I love the car and i drives great, nice power too.

Only issue is I get white smoke, a little at start up but more during low end acceleration and idling in traffic. The smoke comes between 1000 and 1900 rpm and I have noted:

- Car does not consume excessive oil
- Car does not consume coolant
- Power is good and so is throttle response
- Injector nozzles were changed by previous owner one year ago
- Smoke comes even when the car is warm

Please let me know if anyone has experience with this issue, I doubt its the rings or valve seals, I suspect its a fuelling issue at acceleration and low rpm.

Thanks
Hi

Did you fix the issues? My HDJ81 also have this issues for few months! :/
 
What the OP said sounds like valve stem seals.
Slight smoke on startup, and once warm smoke on acceleration from a stop are a good indicator of worn out valve stem seals burning oil a little at a time.
 
What the OP said sounds like valve stem seals.
Slight smoke on startup, and once warm smoke on acceleration from a stop are a good indicator of worn-out valve stem seals burning oil a little at a time.
My 80 would have a bit of smoke all the time! What possible issue would have?
 
My 80 symptom is exactly same as monster80!

- Car does not consume excessive oil
- Car does not consume coolant
- Power is good and so is throttle response
- Injector nozzles were changed by previous owner one year ago <-- except this!
- Smoke comes even when the car is warm
 
It a diesel right? I overlooked the faCt that it was an 81.

Does it have a possible fuel knock developing? Sounds different at idle?
 
Last edited:
Our resident smoke expert (BILT4ME) can not only tell you the significance of the color, but also the refinery from whence the fuel came AND the dino that was juiced to make it.
 
My guess is also valve seals. I'd get those checked out before throwing money at parts. Not that theres anything wrong with that.
Is the part# 11213-17020 Gasket, Cylinder Head Cover? Can I use the smoke test testing the leak problem? Thx
 
Is the part# 11213-17020 Gasket, Cylinder Head Cover? Can I use the smoke test testing the leak problem? Thx
I think that is a valve cover gasket, that will not be the problem.

The seals I was referring to are inside the cylinder head. They are called valve stem seals.

However it could be other things like adjusting the valvetrain, or possibly an injector issue.

Post in the diesel tech section of the forum with your video, and you may get more opinions on your trucks issue.
 
Is the part# 11213-17020 Gasket, Cylinder Head Cover? Can I use the smoke test testing the leak problem? Thx

Your truck is a diesel.

White smoke in a diesel typically indicates unburned fuel. Looking at your video, there is NOTHING wrong with what I see.

If it were a head gasket, the white smoke would be significant.

Please head over to the diesel section for those folks that know a lot more about THIS brand and are familiar with the specifics of the injectors and injector pumps, as well as the required emissions for that truck.

Most of the responses above would apply to a PETROL (gasoline) engine and not a diesel.
 
 
What the OP said sounds like valve stem seals.
Slight smoke on startup, and once warm smoke on acceleration from a stop are a good indicator of worn out valve stem seals burning oil a little at a time.
My experience is smoke on acceleration is piston rings; smoke of deceleration is valve seals. Makes perfect sense considering that max intake vacuum is during deceleration and the worn valve seals will allow oil to pass under these conditions. Just a thought.
 
My experience is smoke on acceleration is piston rings; smoke of deceleration is valve seals. Makes perfect sense considering that max intake vacuum is during deceleration and the worn valve seals will allow oil to pass under these conditions. Just a thought.
While those are true statements, they tend to apply more to petrol engines than diesels. They still apply, but if you look at the video, there's not enough going on there to be an issue. Need to monitor actual long-term oil consumption, as the diesel will mask a valve seal issue.
 
Back
Top Bottom