What's a good diagnostic code scanner?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 21, 2008
Threads
11
Messages
38
Not looking to break the bank but wanted a good diagnostic code scanner to troubleshoot my 96 80, when the time comes. What is a good one to get?
 
I have never used a code reader, so I am admiting my ignorance. I have always used a jumper wire and read the flashing of the check engine light. What does a code reader do that would make me want one.
 
I have never used a code reader, so I am admiting my ignorance. I have always used a jumper wire and read the flashing of the check engine light. What does a code reader do that would make me want one.

Check out the scangauge - it gives you real time digital readouts, such as Intake Air Temp, Coolant Temp, Voltage, etc. It is also a great trip meter for tracking fuel consumption, which is great for monitoring the "health" of your engine.
 
I don't have any pics of mine but I mounted it above the useless "cupholder" at the front of the transmission console. Right below the Rear defroster and heater switches. Put some velcro on it, since I loan it out often.


I'll try to get some pics tonight.
 
The Scangauge has some nice extra features.

Personally, I have an Equus Innova 3100. I got the reader w/case for close to $100 online. It does translate troublecodes and resets the CEL. The included software does almost nothing useful EXCEPT that it will download updates for the reader and flash the reader over the included USB cable to update the vehicle database.

It gets a lot of use on my other vehicle.

Or, in keeping with a cheap theme, most national chain car parts places will scan the troublecode and reset the CEL for free.
 
I've got an Actron CP9180. Been very happy with it. The Scan Gauge is a very good option too, if you want to leave it in you vehicle. I use mine for work all the time so having one more service oriented fits my needs better. It will display all the current real time sensor readings like the scan gauge too.

Actron®

I got it on Ebay for a little over a hundred bucks.
d_108.webp
 
Will the Actron give you the trans temp.? IIRC that was one area that Scanguage was lacking?
 
Will the Actron give you the trans temp.? IIRC that was one area that Scanguage was lacking?

Mine does not give a trans temp when reading live data.

But does an 80 have a trans temp sending unit? I don't know?

Scangauge hasn't been able to find the correct signal yet, but they are working on it. There is a trans temp sensor tho.
 
I have a HF OBDII/CAN reader for other vehicles (it also reads VAG COM). Harbor Frieght $40-50.

SG2 in the 80 on the steering post.
 
scangauge

Is ScangaugeII made in US or China? It seems to be a decent diagnostic tool.
 
My caution on very very cheap... I noticed that the basic models in a series of scanners may not even clear the CEL. It spits out the number and thats it. Then you have to find a source for a cross reference and get someone else to clear the code after it is fixed. What a PITA.
 
Back
Top Bottom