What setting...cooling fan temp control?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 22, 2004
Threads
204
Messages
11,638
Location
Deep East Texas
I am getting ready to add a 12" pusher to the Cruiser and have ordered an adjustable temp controller to go along with it.

My main purpose is to add a little airflow in hopes of lowering A/C vent temps when at low speed (in town...stopped or moving slowly).

It gets "miserable hot" in Deep East Texas in the summer months...so I am looking to improve A/C performance anyway I can.

My Question: At what temperature do you think I need to set the sensor (range is 160-230 F.)

Clearly, I don't want to set it at the upper ranges (the a/c would cut out @ 226)

Does 190-200 sound about right? My cooling system is in excellent shape and the A/C system properly charged. I've just never been impressed with the LC's A/C at low speeds.
 
Im installing a 12 Derale Tornado with the probe type sensor in the coming weeks. This one is not adjustable and i think it kicks in at 180. I put in a new blue fan clutch last week and i must say it helped dramatically, i really do not even need the pusher, but i have ADD and need to be doing something all the time :) Besides here in Florida i dont think overcooling is gonna be an issue-
 
Greetings,

Check out this threadhttps://forum.ih8mud.com/80-series-tech/103530-abcs-80s-cooling-part-iii-press-switch.html?highlight=abc%27s+cooling

Instead of using temperature or compressor to activate the fan, this system uses AC system presure. Connecting into this switich activates the fan when the system reaches a predetermined level. Presumably, this is how non US spec cruisers activate their standard aux fan. I have been running this with my condenser cooling fan and maintain my cool vent temps at all times. I've also wired an incabin switch to manually operate the fan.

Steve
94' 190,000
 
Greetings,

Check out this threadhttps://forum.ih8mud.com/80-series-tech/103530-abcs-80s-cooling-part-iii-press-switch.html?highlight=abc%27s+cooling

Instead of using temperature or compressor to activate the fan, this system uses AC system presure. Connecting into this switich activates the fan when the system reaches a predetermined level. Presumably, this is how non US spec cruisers activate their standard aux fan. I have been running this with my condenser cooling fan and maintain my cool vent temps at all times. I've also wired an incabin switch to manually operate the fan.

Steve
94' 190,000

https://forum.ih8mud.com/80-series-...iii-press-switch.html?highlight=abc's+cooling
 
Back
Top Bottom