What part is this?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

smf

Joined
Dec 19, 2004
Threads
40
Messages
85
Location
vegas
I am installing a new master cylinder and I am wondering what this part is for?
Do I need it? I am running stock dics up front(its a 78) and a disc conversion in the rear.
PB210045.webp
 
I strongly suggest replacing it with an adjustable proportioning valve.

The principle is simple. The valve restricts fluid flow to the rear because when you brake, the weight of the vehicle shifts forwards, lightening the weight over the rear wheels. If the rear wheels recieved the same amount of brake pressure as the front, without the weight to insure traction, they would just lockup and skid. Hence the need to slow their reaction time.

Rear discs will not react at the same rate as rear drums, so you will need a valve that you can adjust to match both the reaction rate and the probable difference in vehicle weight of YOUR landcruiser as it currently sits. I know that Downey Off Road offers an adjustable valve. A good thread search of this forum will prolly provide other sources as well. Frankly, the few that I sell come from Downey because it is convenient. I haven't had any problems with them, and that counts for something.

Hope this helps

Best

Mark A.
 
Thanks for the info. I have a willwood adjustible prop valve. Do I just replace the unit pictured above with the willwood?
 
Thanks for the info. I have a willwood adjustible prop valve. Do I just replace the unit pictured above with the willwood?

Yup.;)
 
Sorry guys, one more question. On the willwood prop valve I have, there is an in and an out. How should I connect it it up?
 
Sorry guys, one more question. On the willwood prop valve I have, there is an in and an out. How should I connect it it up?

You always have the option of calling Wilwood to confirm it, but it would seem natural that 'in' would be from the brake MC, and 'out' would be towards the wheels.

Disclaimer: I've never used a Wilwood valve.

;)
 
I used a Wilwood prop valve on my 40 and 65swb45 and nuclearlemon are correct.
 
Back
Top Bottom