what door speakers?

[hammer1]

i remember seeing a thread about door speakers for the 60 series, and the consensus was that Crutchfield had a pair of 5" that would work . because of the depth of the panel, not many would.
I went to the web site, but the no longer carry any speakers the "fit your car"
any ideas? with the nice weather coming, i like to drive with the windows down, and then i cant hear anything except cracking.

Hammer

 

[Deep South Cruisers]

Kenwood and Alpine both had shallow mount 6-1/2" that fit. Seems like the depth limit was 2-1/2"

 

[Blue Chip]

I just dropped 5-1/4" Polks in the doors - no fitment issues at all. If you line it up right there are speaker holes cut in the inner door frame as well - shouldn't ever be any issues with depth. Pop the door panels off and take a look - EZPZ.

 

[SDFJ60]

MBQuart worked for me, 6.5inch coaxials.

 

[VTCruiser]

MB Quart RSC 213 "reference" Series component set

 

[BigRed87]

I have 5 1/4" alpine type Rs in the fron doors with nothing but 1/8" plexiglass as a spacer, no where close to rubbing.

 

[Darkrealms]

I've got Rockford Fosgate P152S series and they work fine in mine. They're 5 1/4s

 

[macgyverFJ62]

5 1/4 Infinity 5002I up front fits fine

 

[jjbodean1970]

5.25 alpine up front with small spacer

 

[89s rule]

some have spacing issues, whatever i got to fit up front wouldnt work they are sitting in my garage till i find time to mess with them again They are rockford fosgate. not knwo model # off top of my head.

 

[EarthX]

6" 3-way Infinity Kappa's fit in mine with very very minor grinding.....



a lot of ideas here.................. https://forum.ih8mud.com/showthread.php?t=40382

 

[Deep South Cruisers]

the difference in all of these is the mounting... I had 6-1/2" Alpines behind the factory grilles no cutting required.

 

[FJ60-Hokie]

Do any of these speaker setups NOT require you to cut the stock door panel?

 

[NocalFJ60]

Do any of these speaker setups NOT require you to cut the stock door panel?

Sure I installed some Alpines that are not totally flush with door but the stock door panel fits right on over them.

 

[Mike S]

I used some 5-1/4" Blaupunkts. Seem to be fine, and the stock grill fits over them.

M

 

[gulp3000]

5.25" Pioneer from Wally world (cheap) I had to drill a couple mounting holes and I shimmed them out a hair to make sure the window didn't hit. Used the stock cover and they sound pretty good and no major modification was needed.

 

[cruzerfetish]

Since Gulp3000 revived this thread I will add my .02. I just read this thread last week and went and got 6.5 inch alpines. They definitely fit with no rubbing on the window. The door trim panel bulges slightly over the speakers but everything fits and they sound great. I don't have any other speakers in the cruiser besides these and they are nice and clear and loud enough that I can still hear the music at highway speeds with the windows down.

A great choice. Cost me 100.00.

 

[hodag]

6.5" Kenwood 3ways. Cant remember model. I took off the stock grills and put on the Kenwoods. No rubbing problems.

Hodag

 

[AndersN]

i fit some pioneer's in the front door panels...www.etronics.com they were 5 1/4 inch and they sound great...just check the depth of the speaker pre-installiation

 

[sandcruiser]

a buddy installed some component speakers- 5.25 and 1", I think. The sound difference was pretty impressive.