What am I missing?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 16, 2005
Threads
9
Messages
37
Location
Dothan, AL
First
I recently bought my first pig and am looking for any information as to what I am missing on my dash (aside from the stereo). It seems that there is something missing where that brown line is. Also, there is a small hole up top next to the writing.


Second
I have reason to suspect the PO installed these buckets. There is wood underneath the seat to keep it level and a make shift bracket up front. Is there any way (other than wood, of course) to mount the seats correctly?
jpg.gif
jpg.gif

Picture 008.webp
 
Last edited:
Well I actually know the answer to this one. The large cutout is for an ashtray assembly. The small hole up top I think is probably for a aftermarket light switch for fog lights or something. For the seats, I would weld up a bracket to bolt down to the floor and bolt to the seats.

I'm sure others will have pics of how they did it for you, but I'm a newbie as well as a fellow Alaskan and know for sure the ash tray thing!

Good luck
 
Not that I know much about Pigs ;p and BTW, we do have a forum specifically for them, but IIRC, that hole next to the name plate is for the toggle that controls the tailgate window.

;)
 
Upper switch is for the rear tailgate wdw. Lower points to a missing dash pad. I never liked the factory seat brackets as they hold dirt & such & it's hard to clean it out. I'm making some tubular seat mounts & will post pics when I'm done.
 
Back
Top Bottom