Went Wheeling, Bent Control Arm.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 1, 2007
Threads
14
Messages
54
Went to the Big Dogs, IceBreaker event this weekend. Ran some pretty good trails (6&7's). I was the only some what built 80 there. I beat up the cruiser pretty good though:
  • Tore up rocker panels pretty good (sliders on the way)
  • Dented both front fenders and rear driver door
  • Bent passenger control arm (95 model)
  • Gas tank skid plate took some pretty good hits
My front axle has never been serviced and the birfields like to click, but i can assure you a clicking birf is not a death sentance. I gave the Cruiser hell all weekend with no issues. 2 Toyota trucks blew birfields in our group.You should have seen the look on the jeep guys faces when my big pig would keep making the same lines.

I plan on putting the control arm in a press to staighten it, bad idea? From my searching on the forum seems like they are kind of hard to get straight.
Big Dogs 9.webp
Big Dogs 10.webp
 
Congratulations and welcome to the club.
Your now looks just like mine:)
Now what are you going to do?
- Weld on angle iron yourself
- Find some old scrap yard ones
- Order some beefy slee arm$
- Make your own
I am leaning towards the latter
 
-Or flip them.
 
Thats just a higher clearance arm now.
 
Ignore it and hope it goes away. Works for me.

-Spike
 
Smash the arm against a tree. Repeat as needed.

:flipoff2:
Correct me if I'm wrong, but bending metal back and forth is going to weaken it pretty substantially. May not be bad the first time or two, but if it keeps happening, shouldn't we be replacing?
 
Correct me if I'm wrong, but bending metal back and forth is going to weaken it pretty substantially. May not be bad the first time or two, but if it keeps happening, shouldn't we be replacing?

That was a joke.

That advice might be good for a trail fix to get the truck home (if the bend was worse), but yes, I would replace it or cut it out as Bailey mentioned.
 
That was a joke.

That advice might be good for a trail fix to get the truck home (if the bend was worse), but yes, I would replace it or cut it out as Bailey mentioned.
K, just wanted to make sure that :flipoff2: at the bottom meant "I'm not serious" and not "if it still fits, it still works"

:flipoff2:
 
It's the kind of thing we cheap fix by putting it between two big peices of wood and smashing with a BFH, something on the order of a sledge hammer. The arm is mild steel in any case and should come out good enough. The wood is needed to protect the metal and hopefully not let it develop a dent.

If you excercise due care and diligence, you should be able to get the whole thing back to a usefull condition.


Kalawang
 
I was in the green 80...I saw your white lady over in the stock group...How where the trails? Got Lockers? Please tell me you beat up on that black LR3.
 
Back
Top Bottom