Went muddin fried ecm

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 4, 2014
Threads
3
Messages
29
Howdy yall i did search but didnt get lucky.
All help is appreciated from my fellows mudders.

94 fzj80 267,000 on the clock.

I went muddin today and then drove 45 miles to tha House. I went inside and let the truck cool for a while and came back out washed a little mud out from the engine bay not much really. Didn't really soak anything. Then I went back in and later I was going to the bank and any time I tried to go normally it lost all power like as if i let off the gas pedal but the truck stayed running and it never died. but if I was easy I could gain mph. I Finished my bank trip and on the way home the cel popped up but went away shortly after. I was still able to pull cel 84......so my question is should I just get a new ecm or could it be a fluke.
I knew I should've started it after I rinsed it off under the hood.
 
Sounds like maybe you got the distributor wet. cel could possibly be misfire codes. try popping the cap on the dist and seeing if its wet.
 
Well I figured it out the alternator died right after I got home from the mud bog. I had just enough juice to make to the bank and back. Glad I got home lol. I guess the low voltage caused cel 84 to pop on. I'll know for sure tomorrow when I get a new alternator. Thanks for the reply I'll give an update tomorrow.
 
A new ECU is likely unobtanium, but would be well over $1k is it was.

I agree most likely a wet distributor cap, a much cheaper fix.:D
 
Correct me if I'm wrong. BUt the ECU is inside behind the firewall, not a likely place to get water damage unless your harness is cut/broken/spliced or something triggering it. And you say the CEL is working. So my guess like mentioned is something a lot more simple like the dist cap or even water in the sparkplugs (if the seal has failed) or ......
 
Toyota found one for me recently. They were asking 1889$ so I got a used ECU off of the forums.

Probably dealer stock somewhere, but I'm sure there's few of those considering the cost. Here's the lowdown from beno on Oct 15, 2015...

All 80 series 3F-E and 1FZ-FE engine ECU's are now discontinued from Toyota.

Keep those ECU's safe if you have spares. They are now worth their weight in gold.

The Ultimate 80 Series Parts Discontinued Thread
 
Thanks for all the quick replies. So it was the alternator. I guess the low voltage decided to throw the cel 84 ecm code randomly which makes perfect sense if the electronics aren't getting correct volts.
Dang scary code to get but all is well now
 
Back
Top Bottom