Weird tire wear

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 14, 2015
Threads
20
Messages
109
Location
NorthBay, CA
I have some bfg all terrains on my wagon and I'm noticing some strange wear on the passenger front. No odd vibrations, weights are still on, tie rods good except for one on the passenger side but I'm not getting play when I rock tire at 3 and 9 o'clock. Shocks are pretty much toast I think, and the steering wheel is canted to the left when driving straight. Drives straight, no pull to either side. This is something that started about 2 weeks ago. It is on the outer edge of the treads. Anyone familiar with this? Will post more pics if needed.

IMG_20160921_183646289.webp


IMG_20160921_183646289.webp
 
Time for a few things...
- replace TREs, if they are possibly questionable then it is money well spent. Get the 555 brand from Kurt or Georg
- replace shocks, will help improve the ride and once again money well spent. Doesn't have to be anything fancy, you could get the $30 (or whatever) Monroes and go from there.
- get an alignment professionally done AFTER the TREs are replaced. This way there is not question to what was done. Do a rotation of the tires at the same time so you can start with a fresh canvas to ensure everything is good.
- go through and tighten all your suspension hardware to ensure all is up to snuff
 
Is the wear even all the way around or spotty? If even, it seems that one tire is toed in. If spotty, might be a shock.
pretty even all the way around.
Time for a few things...
- replace TREs, if they are possibly questionable then it is money well spent. Get the 555 brand from Kurt or Georg
- replace shocks, will help improve the ride and once again money well spent. Doesn't have to be anything fancy, you could get the $30 (or whatever) Monroes and go from there.
- get an alignment professionally done AFTER the TREs are replaced. This way there is not question to what was done. Do a rotation of the tires at the same time so you can start with a fresh canvas to ensure everything is good.
- go through and tighten all your suspension hardware to ensure all is up to snuff
sounds good-needs to be done anyway. wanted to do an OME lift and use the shocks from the kit but I think I'll go your shock route
 
I'm experiencing the same thing... I've only had the truck for a couple months, so I have no idea how many miles are on these tires or when/if they were ever rotated... I have to keep the steering wheel turned slightly left to track straight down the road. I do have some slop in the steering, but it's not horrible.

Tie rods and all look straight--no damage or bending. I just plan on replacing all the TREs and getting an alignment (and making sure they set the steering wheel straight), especially since I'm going to be getting new tires soon.

IMG_1948.webp
 
do your own alignment

Just in case. You guys might prefer a pro alignment because of the abnormal tire wear, but it's pretty easy to do yourself. Fixing the steering tracking is easy too. The 84-90 Body manual has excellent instructions for alignment as well.
Agreed. I ended up doing the pro alignment as I just couldn't get mine right and had wobble at 35+ mph. Plus it was a block from my office so all was good. They also told me that my steering box had slop in it that seemed indicative of wear that would require a rebuild.
 
I think my steering box is worn too. The knuckle/tie rod/drag link overhaul made a night and day difference in the steering wheel feel...except at straight ahead. I'm interpreting this as wear in the part of the gearbox that sees 99% of the action.
I can visualize how a loose worn TRE could cause that corner to wear unevenly. Maybe?
 
I think my steering box is worn too. The knuckle/tie rod/drag link overhaul made a night and day difference in the steering wheel feel...except at straight ahead. I'm interpreting this as wear in the part of the gearbox that sees 99% of the action.
I can visualize how a loose worn TRE could cause that corner to wear unevenly. Maybe?

Yup have almost the exact same experience! Plan is that next spring when I can actually get back to riding to work normally (leg should be fully healed by then) I am going to pull the steering box and send it to West Texas Offroad to be rebuilt.
 
Yup have almost the exact same experience! Plan is that next spring when I can actually get back to riding to work normally (leg should be fully healed by then) I am going to pull the steering box and send it to West Texas Offroad to be rebuilt.
Easy thing to rebuild yourself. Don't need to be on your feet to do it either aside from getting the pittman detached from the output shaft. I alternated with a puller and a 2lb sledge. Worked like a charm. And honestly it would have come apart sooner if I'd realized the puller was actually holding them together. I'd add a pix here but my cpu and mud aren't being friendly.
 
So @NeverGiveUpYota, to run a derailed thread further into the ditch, I have yet to study a diagram of the steering box but I am wondering, will a rebuild replace the wear parts? Seems like the kits i've seen are just gaskets etc and would doubt that that will fix it. Am I missing something? My only experience with steering boxes was a tractor that had to have a gear built up with welding to fix.
I'd love to tackle it myself, seeing what's inside is the fun part!
 
So @NeverGiveUpYota, to run a derailed thread further into the ditch, I have yet to study a diagram of the steering box but I am wondering, will a rebuild replace the wear parts? Seems like the kits i've seen are just gaskets etc and would doubt that that will fix it. Am I missing something? My only experience with steering boxes was a tractor that had to have a gear built up with welding to fix.
I'd love to tackle it myself, seeing what's inside is the fun part!
I am def not one to tell you for sure but what I understand is its not the box or the housing that wears... the splines tho on the output shaft def could I think especially if it wasn't aligned properly with he pittman at one time or if driven hard? (I'd bow down to @orangefj45 or @landcrusher909 or even @Output Shaft) regarding wear on those areas. I can add here or email you the diagram I have from the rebuild kit and another I got from toyota when I had to contact them for a few rings that blew in the kit. LMK.
 
First thing I would go is check the wheel bearings and TREs.
Obviously you've looked into that.
Next would be taking it to your local alignment shop.
Arm yourself with as much info as you can and then purchase the appropriate parts.
If you need any technical help or info and/or parts, feel free to contact me.

Georg @ Valley Hybrids & Cruiser Brothers

Cell Phone (650) 576-2023
 
Hey all I appreciate the responses. It's one of many concurrent projects I've got going on the truck and I should say that it drives really well, not scary at all. It was professionally aligned fairly recently and really I have no reason to suspect anything is out of whack. It's in for new shocks and spring bushings next (all original) and go from there.
 
Back
Top Bottom