warn full floater hub seal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 30, 2003
Threads
647
Messages
16,635
Location
windy wyoming
now that i got the tcase pretty much done (still need to make one piece of linkage), i've moved on to swapping the 4.11's for the 4.56's that i had in the wagon. i've got the warn full floater rear with the ford one ton hubs and since day one, i've never gotten the oring at the hub to seal up...doesn't drip, but leaks enough that after a month or so, the entire hub and rim are plastered with splattered 90w. i talked to warn a couple of years ago and they suggested permatex...i put some permatex on in addition to the oring the last time i was in it, but still leaks...anyone else have this problem and have maybe figured out a solution?
 
I use grease and not oil in the bearings of the Warn rear full float in my truck...

Since '99, I have not had any issues like what you, and others have talked about....


Good luck!


-Steve
 
Poser said:
I use grease and not oil in the bearings of the Warn rear full float in my truck...

Since '99, I have not had any issues like what you, and others have talked about....

Funny... Some switch from gear lube to grease when originally intended for grease (you and your Warn axle)... Others switch from grease to gear lube (Devro & his Toyota FF)

No one is ever satsified... :D
 
i opted to go oil because it offers better cooling and lubrication that grease and if something does get fubared, there's less chance of welding stuff together from extreme heat.
 
Back
Top Bottom