Valves pinging??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 18, 2007
Threads
11
Messages
54
So I have a '97 LC 168k miles, and about a month ago I started hearing pre-ignition pinging in the valves. It sounded like bad fuel or incorrect octane, but that indeed isn't the case. Do any of you have suggestions? My check engine light came on for a day and a half then went out, I don't have the cash to take it in for a check, they wanted $90 just to check it out and clear codes etc. So I am looking for help here. I have been trying to research and I have spoken with one guy who works on these on a regular basis, he said the check engine light may be pointing to a sensor which is reading incorrectly and telling the computer to retard the ignition timing. Of course he wasn't sure but it seems to me that the pinging is getting worse.
Looking for suggestions?
Maybe this happened to one of you?

thanks in advance!!
 
Howdy! Your buddy is probably right. Spend the $90+ on a code reader (or borrow one) and check it out. The pinging usually means the timing is too far advanced, not retarted. Have you tried running a tank of Hi Octane thru it? You might even try a can of Octane Booster. Any chance it is a very small exhaust leak? John
 
I did indeed run premium through it for 2 tanks and there was absolutely no change at all. I don't believe there is any type of exhaust leak either. I took a very thorough look into fuel, octane, exhaust, oil, etc.. I have also heard that spark plugs can sometimes cause this, ever hear of that?? That one didn't make as much logical sense to me as the timing being thrown off from a sensor reading incorrectly though. I will get those codes this week then post them!
Thanks guys!
 
ok I went to the auto parts store and was able to pull codes but there were NO CODES.....\
Now what the heck do I do? I thought that any code that would turn on the check engine light would store. I didn't realize that if the light turns off before you can read the code there is nothing there. Weird!

So I am looking for suggestions if anyone can help????
 
OK, so much for the octane idea. I had the same "code" problem on my daughter's Echo. It would code for the Catlytic converter, but it was running very erratic. 2 different parts store could only get a Cat code, and the 3rd store got no code at all. But, the dealer found it coding up for the MAF. Fixed the MAF and left the Cat for later. Runs great now. Codes are handy, but they are very elusive. John
 
Back
Top Bottom