valve stem caps that air down tires.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

The one I have I made out of a 12 inch piece of air line with a tee on one end and hooked to the tee is a 0-60 psi gauge and an air blow off tool on the other end of the air hose is a quick connect tire inflator. Lock the inflator on and it reads pressure in the gauge from the tire push the handle down and it deflates until u release and check pressure again. cost me six bucks to make I made 5 for me and the guys I wheel with works great
 
Back
Top Bottom