VAF to MAF - any progress ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 11, 2008
Threads
63
Messages
321
Location
London, UK & Lusaka, Zambia
The progressive acceleration differences between my cars.. '96 LT MAF, '96 OEM MAF, and '93 VAF are pretty noticable, so I'm really interested in this. My '93 intake restrictions are further compounded ny some LPG (propane) mixing, but I've been able to isolate that out (whilst running on petrol) and the differences are still there, albeit somewhat reduced. A BLOS propane carb is en route....

Anyways, I've done quite a few searches, and it seems Rick and Semlin were looking into this, but not sure it really took off.... any updates from those guys or anyone else much apprecaited please ?

Swapping from the LT '96 to the 93 just kills me :rolleyes:
 
I need to get off my ass and talk to my local tuning shop. It's about third or fourth on the future mod list, but talking to a shop is free. Split second makes a computer that will flip the voltage output and is programmable, so I'm pretty sure it would work. I will just need a little help with the tuning.
http://www.splitsec.com/products/datapdfs/PSC1-005.pdf
 
If I end up playing pioneeer (which is not really good for anyone 'cos I'm a total bodger), I'm thinking of rigging up some tempory intake ducting with both the original VAF (connected) and the OEM MAF in line, both connected to voltmeters, and go through some repeatable load conditions, e.g. driving at certain speeds, up/down certrain grades, flooring it, etc, to give me some refecence points. Then whatever voltage inverter / progmrammer jobbie I use, I could supply with the recorded MAF voltage and frig till it outputted the desired correlating VAF voltage.

Should be an interesting piece of ductwork ;)
 
Back
Top Bottom