norsk
SILVER Star
- Location
- United States
[UT] 2F engine parts and transmission for sale - good rebuilt head & Trollhole carb
Well, my 1986 2F engine gave out - looks like loss of rings in one of the cylinders since I have a HUGE amount of blowby coming out of the PCV breather port on the valve cover and a bad miss.
See https://forum.ih8mud.com/showpost.php?p=8127483&postcount=59 to see the blowby smoke
I have been working on a SBC 350 rebuild for the 60, but it has been going slow at:
https://forum.ih8mud.com/60-series-...future-350-swap-how-much-torque-too-much.html
so this event will speed up that SBC 350 install. As a result I am going to part out the 2F motor which I previously have
invested in to make it perform well, but I am not going to invest in a short block rebuild when I can do the V8.
I believe the parts are all a good deal, but the market will determine that.
I need to move these as I get the parts off the vehicle so I can speed up that SBC 350 install.
I will be selling the low mileage rebuilt head and the rebuilt rocker arm, installed earlier april 2011.
https://forum.ih8mud.com/60-series-...putting-rebuilt-upgraded-head-my-fj60-2f.html
for info on that action. Not too many miles on that rebuilt head and fully refurbished rocker
I put abt $450 into the head (that included the 2nd head core) and $275 into the rocker arm via Rocker Specialists in CA, but will sell for less
so am asking the following:
$75 (OBO) + SH (abt $65) on the original head (I had bought a 2nd head [was $120 from Texas] to get rebuilt above, so I have this core still)
$100 (OBO) + SH on the coil and ignitor
$75 (OBO) +SH on the original dizzy, not yet modified
$75 (OBO) 6-to-1 2F header
$75 intake manifold
Has the $75 water cooling system install, but it leaked and never gotten around to fixing it. No cost for that if you take the whole manifold set.
$50 (OBO) + SH for carb cooling fan, works great
$50 + SH for JimC idler pulley which replaces the Air Pump
$275 OBO + SH AC compressor
SOLD: JimC mod'd dizzy $175
SOLD: $200 including SH, Trollhole carb, about 10 months old, has high altitude jets in it, but has low altitude jets in the carb space
SOLD: $330 (OBO) + SH (abt $65) on the head
SOLD: $150 (OBO) + SH (abt $25) on the rocker arm
At this moment, the whole thing is currently assembled, but will begin taking the parts off of it in the coming days/weeks. As I get individual parts off, I will post pics.
I AM Keeping the Xfer case and the Green Machine Alternator r.
Look at my above links which have some pics of the whole engine
Other power train parts are available and I will post them in the future:
2 year old starter - best offer
4 speed tranmission - best offer
transmission housing - best offer
flywheel - best offer
harmonic balancer - best offer
everything else on the engine is available for an offer. Even the short block, if anyone wants it for a rebuild or whatever.
If you think of something you need from a 2F, ask me about it. Someone might want it.
dougbert
Well, my 1986 2F engine gave out - looks like loss of rings in one of the cylinders since I have a HUGE amount of blowby coming out of the PCV breather port on the valve cover and a bad miss.
See https://forum.ih8mud.com/showpost.php?p=8127483&postcount=59 to see the blowby smoke
I have been working on a SBC 350 rebuild for the 60, but it has been going slow at:
https://forum.ih8mud.com/60-series-...future-350-swap-how-much-torque-too-much.html
so this event will speed up that SBC 350 install. As a result I am going to part out the 2F motor which I previously have
invested in to make it perform well, but I am not going to invest in a short block rebuild when I can do the V8.
I believe the parts are all a good deal, but the market will determine that.
I need to move these as I get the parts off the vehicle so I can speed up that SBC 350 install.
I will be selling the low mileage rebuilt head and the rebuilt rocker arm, installed earlier april 2011.
https://forum.ih8mud.com/60-series-...putting-rebuilt-upgraded-head-my-fj60-2f.html
for info on that action. Not too many miles on that rebuilt head and fully refurbished rocker
I put abt $450 into the head (that included the 2nd head core) and $275 into the rocker arm via Rocker Specialists in CA, but will sell for less
so am asking the following:
$75 (OBO) + SH (abt $65) on the original head (I had bought a 2nd head [was $120 from Texas] to get rebuilt above, so I have this core still)
$100 (OBO) + SH on the coil and ignitor
$75 (OBO) +SH on the original dizzy, not yet modified
$75 (OBO) 6-to-1 2F header
$75 intake manifold
Has the $75 water cooling system install, but it leaked and never gotten around to fixing it. No cost for that if you take the whole manifold set.
$50 (OBO) + SH for carb cooling fan, works great
$50 + SH for JimC idler pulley which replaces the Air Pump
$275 OBO + SH AC compressor
SOLD: JimC mod'd dizzy $175
SOLD: $200 including SH, Trollhole carb, about 10 months old, has high altitude jets in it, but has low altitude jets in the carb space
SOLD: $330 (OBO) + SH (abt $65) on the head
SOLD: $150 (OBO) + SH (abt $25) on the rocker arm
At this moment, the whole thing is currently assembled, but will begin taking the parts off of it in the coming days/weeks. As I get individual parts off, I will post pics.
I AM Keeping the Xfer case and the Green Machine Alternator r.
Look at my above links which have some pics of the whole engine
Other power train parts are available and I will post them in the future:
2 year old starter - best offer
4 speed tranmission - best offer
transmission housing - best offer
flywheel - best offer
harmonic balancer - best offer
everything else on the engine is available for an offer. Even the short block, if anyone wants it for a rebuild or whatever.
If you think of something you need from a 2F, ask me about it. Someone might want it.
dougbert
Last edited: