Upper Control Arms - Adjustable options.

[ntsqd]

That's too bad that Roger is out of the spacer biz. I ran his spacers on the 4rnnr and set the t-bars according to the FSM. Which was higher than where it was when I got it. Cleared 31's on the OEM alloy wheels with no problems or rubbing. I also replaced all of the bump-stops with slim urethane versions.

If he still sells them, I'd buy his idler arm too.

 

[Miloslavich]

Yeah unfortunately he doesn't sell anything anymore. entire store closed down. bummer indeed. FYI: The only beefed up idler arm i'm aware of is the total chaos version: Toyota Pickup 1986-1995 CADDY IDLER ARM - RIGHT HAND DRIVE | TOTAL CHAOS FABRICATION - https://www.chaosfab.com/product/1986-1995-Toyota-Pickup-4WD-Caddy-Idler-Arm-Right-Hand-95130-RHD

do you recall which bump stops you had?

 

[ntsqd]

The TC idler is made for their whole steering kit, which uses SRE's instead of TRE's. Great for racing where they get a lot of maint. per mile driven. Not so great for street driven vehicles. (Watch all of those running SRE's come out of the woodwork with counter-claims. I'm looking at DECADES of service where they're talking a couple thousand miles at most.) It's been a while since I looked at it, but I don't think it easily adapts to otherwise stock steering very easily.

I used generic Energy Suspension bump-stops.

 

[Miloslavich]

Are there any other idler solutions you are aware of?

thx

 

[ntsqd]

The only other idler option that I know of hasn't been made is a decade or more. It was a plate that clamped to the idler arm to make it more rigid. Roger's page may mention it and maybe has a picture?

 

[The Toad]

Milo. If you're still looking around for a 1.5" bj spacer, the only place I found when I was searching over the summer is Toytec here in Denver. IDK why but most vendors sell them in 2.5" which is too much IMO. Here's a link:

IFS2-KIT - Toytec Front Ball Joint Spacer Kit (86-95 IFS Pickup & 4Runner)

Vehicle Fitment: 1986-1995 IFS 4Runner and Pickup 4WD

toyteclifts.com

There are independent sellers on ebay that offer 1.5" billet spacers as well. Another link for you below. Unfortunately, Roger aka 4Crawler stopped carrying a lot of the good stuff he had to offer, including his idler arm Bought my diff drop kit from him back in August. You can always email him, his website is archaic but well detailed, and he still uploads to youtube on DIY stuff every blue moon. His web page on idler arms could be of use to you, as he provides insight into some of the aftermarket options out there. One more link for ya.

2'' 50MM Lift Kit Front Ball Joint Spacer 38MM For Toyota Hilux IFS LN107 LN166 | eBay

For Toyota Hilux LN107 / LN109 / LN111 3L 8L Diesel 1988 - 1997. For Toyota Hilux LN166 / LN171 / LN191 3L 8L Diesel 1997 - 2005. 1.5" 38MM Front Billet Ball Joint Spacer Lift Kit Fit Hilux Surf IFS 4WD 1986-04.

www.ebay.com

Toyota IFS Idler Arm Upgrades

 

[Miloslavich]

Kyle, Thanks brother this is great. I was just emailing with Roger about his idler arm stuff.. going to have to machine a set for myself. I wish he was still in business!

 

[gnob]

Milo. If you're still looking around for a 1.5" bj spacer, the only place I found when I was searching over the summer is Toytec here in Denver. IDK why but most vendors sell them in 2.5" which is too much IMO. Here's a link:

IFS2-KIT - Toytec Front Ball Joint Spacer Kit (86-95 IFS Pickup & 4Runner)

Vehicle Fitment: 1986-1995 IFS 4Runner and Pickup 4WD

toyteclifts.com

There are independent sellers on ebay that offer 1.5" billet spacers as well. Another link for you below. Unfortunately, Roger aka 4Crawler stopped carrying a lot of the good stuff he had to offer, including his idler arm Bought my diff drop kit from him back in August. You can always email him, his website is archaic but well detailed, and he still uploads to youtube on DIY stuff every blue moon. His web page on idler arms could be of use to you, as he provides insight into some of the aftermarket options out there. One more link for ya.

2'' 50MM Lift Kit Front Ball Joint Spacer 38MM For Toyota Hilux IFS LN107 LN166 | eBay

For Toyota Hilux LN107 / LN109 / LN111 3L 8L Diesel 1988 - 1997. For Toyota Hilux LN166 / LN171 / LN191 3L 8L Diesel 1997 - 2005. 1.5" 38MM Front Billet Ball Joint Spacer Lift Kit Fit Hilux Surf IFS 4WD 1986-04.

www.ebay.com

Toyota IFS Idler Arm Upgrades

i couldn't get this site to work worth a shyt...
glad something was actually there.

 

[The Toad]

Kyle, Thanks brother this is great. I was just emailing with Roger about his idler arm stuff.. going to have to machine a set for myself. I wish he was still in business!

Any time! Just tryna give back to a community that has given me much. ILuvMud

 

[Miloslavich]

Any time! Just tryna give back to a community that has given me much. ILuvMud

Agreeed! Been here on mud since 2009 and I owe so much to the site.

fyi, I tried to order those toytec spacers today, and as @gnob stated, that website is a bit screwed up. Would not let me complete the transaction. Put a call in to them and left a message. We'll see