U joint torque

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 1, 2014
Threads
20
Messages
93
Location
Wherever the money is!
Hey all, I have a 94 LC and changed the front drive shaft joints yesterday and was wondering what everyone has done to torque the bolts down to 54ft lbs or whatever it is. I did a lot of searching but didn't find anything so I just got the bolts tight then gave the wrench a few raps with a hammer and called it good. Hopefully that will be enough, also I think it made the job easier by freezing the new joints overnight and soaking the old ones in WD40. Thanks guys
 
Torque specifications are guidelines. Nowhere in the FSM does it say to use a torque wrench specifically. A torque wrench is a calibrated tool that makes it easy to apply a certain torque. That doesn't mean you HAVE to use a torque wrench. Many bolts on the cruiser are inaccessible with a torque wrench, yet every bolt has a torque spec.

The workaround is to get to know the feel of certain torque values when turning a bolt with a normal wrench. The best way to do that is by practice on a test bolt.
Few shop mechanics that wrench for a living use torque wrenches on every bolt.
 
I use wobble extensions and or the jointed socket
31s9eAXXtfL._AC_UL320_SR214,320_.jpg
WobbleExtension.jpg
 
Back
Top Bottom