Two options to repair the EGR code...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 3, 2006
Threads
259
Messages
1,935
Location
Fort Apache: Victoria
1) $445 for a new EGR vacuum modulator and gasket, plus $125 for a new EGR valve.

or

2) $0.005 for 1" of electrical tape to cover the "check engine" light.


Decisions, decisions....
 
I did the tape fix when my code came back (26) at 3am on the way back from L.A. because the fokker was bright. After dawn the tape was there but I KNEW the light was on. I took the tape off and glared at the light intermittently

When I got home I set off on the excursion that was eliminating the dreaded code.

Step one of any problem (for me) is denial.
 
I paid like 60 dollars for an EGR modulator. I got some sort of vacuum valve put in after I got it, that was 200 and then I made the mistake of taking my 80 to a shop that didn't know anything about Toyota vehicles, and they put in a new VSV for 500 dollars.


I still have a code 71. It won't leave me alone.
 
The bad thing about the EGR code or CEL is when it's time for inspection... instant fail.

Their was a thread here about hooking up a resistor of a certain value....
 
The bad thing about the EGR code or CEL is when it's time for inspection... instant fail.

Their was a thread here about hooking up a resistor of a certain value....

Yeah. luckily we don't have inspections here, but it's still a PITA.
 
The bad thing about the EGR code or CEL is when it's time for inspection... instant fail.

Their was a thread here about hooking up a resistor of a certain value....

The day after I picked my truck up when I went to smog it, it failed because of the CEL, but I went to Mudrak's and he told me how to turn it off, and I went in about an hour after them telling me there was no way to pass unless I got it repaired, and it passed with flying colors.


So if you can keep your CEL off long enough to get it smogged, it should be okay.



After I installed the new modulator, it came back on, and when I turned it off again, it hasn't come back on. So I may have fixed it. Knocking on wood....
 
The day after I picked my truck up when I went to smog it, it failed because of the CEL, but I went to Mudrak's and he told me how to turn it off, and I went in about an hour after them telling me there was no way to pass unless I got it repaired, and it passed with flying colors.


So if you can keep your CEL off long enough to get it smogged, it should be okay.



After I installed the new modulator, it came back on, and when I turned it off again, it hasn't come back on. So I may have fixed it. Knocking on wood....

It needs to cycle twice before it will return. Basically the truck has to go to operating temp and 40(?)MPH twice after resetting the light, and the light will return if the problem isn't fixed.
 
$400 to change the modulator?

Do they kiss you first?

Really easy to change, you don't even need any tools, and as above the part is only $60
 
$400 to change the modulator?

Do they kiss you first?

Really easy to change, you don't even need any tools, and as above the part is only $60

Um... that was just for the parts. I H8Toyota Canada.
 
Um... that was just for the parts. I H8Toyota Canada.

Yer Sh*ttin Me!!! For that price you could replace the VSV and the Modulator by purchasing parts from Dan and you'd still have some left over for some Molson! :cheers::cheers::cheers:
 
Um... that was just for the parts. I H8Toyota Canada.


um something here does not line up,

vacuum modulator should not be $445 even in Canada and it does not take a gasket,


are you sure they quoted you for the right parts?
 
um something here does not line up,

vacuum modulator should not be $445 even in Canada and it does not take a gasket,


are you sure they quoted you for the right parts?

Hmmm, now I'm not sure. The picture had the "flying saucer" on top, but also had a right-angle casting (with a gasket with two bolt-holes) and a length of steel tubing...
 
Hmmm, now I'm not sure. The picture had the "flying saucer" on top, but also had a right-angle casting (with a gasket with two bolt-holes) and a length of steel tubing...

Maybe a pair valve?
 
Hmmm, now I'm not sure. The picture had the "flying saucer" on top, but also had a right-angle casting (with a gasket with two bolt-holes) and a length of steel tubing...

egr valve ?

Look at the diagram on the underside of your hood.

You could replace the valve, mod, and vsv for much less than $445, surely even in Canada.
 
Sounds like they replaced the EGR V-A-L-V-E for the big money, but that part is still not anywhere near that money. They probably broke it getting it off. I guess Canada doesn't require the mechanic submit the replaced parts to the owner? If I were you, right about now I'd be either digging through the receipts or checking to see if they removed the bulb from the CE light.....heh

DougM
 
Sounds like they replaced the EGR V-A-L-V-E for the big money, but that part is still not anywhere near that money. They probably broke it getting it off. I guess Canada doesn't require the mechanic submit the replaced parts to the owner? If I were you, right about now I'd be either digging through the receipts or checking to see if they removed the bulb from the CE light.....heh

DougM

I didn't get it done; I went in to order the parts so I could DIY. Needless to say, I left empty-handed.
 
Back
Top Bottom