turn signal electrical problem

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 23, 2005
Threads
43
Messages
588
Location
East Vancouver, BC
77 fj40. as of last night, i have an issue with my driver side turn signal and brake lights. when i tap the brake, my driver side turn signal goes solid on the instrument cluster. i weighted the brake pedal down and checked the exterior's and they're staying solid along with the brake lights. now, when i hit the signal, it'll flash, provided i don't hit the brakes. the other side works fine. i've never touched electrical before, and don't exactly know where to start. does this seem familiar to anyone?
cheers
drew
 
Its a "ground loop" or floating ground.

The rear bulb housing on the drivers side has a bad ground. Since the turn and brake lights share a gound in the housing, the brake fings its ground by going through the turn signals in front.
 
Its a "ground loop" or floating ground.

The rear bulb housing on the drivers side has a bad ground. Since the turn and brake lights share a gound in the housing, the brake fings its ground by going through the turn signals in front.

Thats it..
Pin Head has it 100%, I had this on my 66 but could not remember how I fixed it. But this was it. The rear light was not grounded.
 
Back
Top Bottom