Turbo Install Without Intercooler Possible?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 2, 2004
Threads
178
Messages
1,417
Location
Athol, MA
I have a turbo on my 97 L/C that I may consider putting on my new to me 96 L/C. Can a turbo be safely run without an interccoler? The reason I ask is that to utilize an intercooler on my 97 I had to remove the tranny cooler and install a custom one, modify the hood latch, cut a large hole in the front bib for the intercooler plumbing, run all the plumbing, relocate the washer bottle so the intercooler plumbing can be routed etc. It seems the turbo install would be much easier and leave a cleaner engine compartment without having to use an intercooler. Just wondering. I know Air/EGT temps are an issue, but how much would not having an intercooler effect this and would it be too big of a risk with no Intercooler?
 
It would depend on how the motor handles the boost you are making. try it and monitor EGT's like a hawk! there several factory and aftermarket setups without intercoolers that I know of but none for a Landcruiser.
 
My current set-up is right around 6 PSI of boost before the BOV opens. I wouldn't go any higher. I'm not looking to make huge HP, just a bit more power.
 
It may be ok but you never can tell. Have you thought about a liquid to air intercooler? I know I recommended against it with your initial setup but packaging is way easier.

Even better than EGT monitoring would be a true wideband A.F setup. Faster and more accurate. I believe turbocruiser has one in his rig.
 
I did consider a water to air intercooler way back when. Maybe that is an option as it can be mounted anywhere with a fan mounted on it..
 
Back
Top Bottom