Transmission

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 23, 2009
Threads
3
Messages
5
So i am new to the fj series and offroad trucks period.I have recently purchased an 91 landcruiser and love it and cant wait to start getting into some offroad adventures, but i have something that may become a problem on my new truck and that is when i accelerate and decelerate on the gas i can hear a little clank but i dont know if its the trans because it seems to be shifting fine. i crawled under the undercarriage and checked the drive line but everything looks fine. doe's anyone know what this could be.
 
So i am new to the fj series and offroad trucks period.I have recently purchased an 91 landcruiser and love it and cant wait to start getting into some offroad adventures, but i have something that may become a problem on my new truck and that is when i accelerate and decelerate on the gas i can hear a little clank but i dont know if its the trans because it seems to be shifting fine. i crawled under the undercarriage and checked the drive line but everything looks fine. doe's anyone know what this could be.

:lol: :lol: :lol:

Welcome.

Search "clunk" if you like, and pay special attention to the posts regarding 91-92's. It's "normal" on those years (search more and you'll find out why). Of course, make sure you don't have a U-joint going out or something like that, but really, our years clunk away for hundreds of thousands of miles with no resulting problems.

Cheers and welcome again,

Curtis
91FJ80, clunking for 240K miles so far...
 
Mine does the same. As Curtis brought out, search is your best friend, but much of that clank can be diminished with a greasing of the driveline. Each U-joint has a grease zerk and each drive shaft has one for a total of six in that area. :) Basically the clank is all the slop through the drive flanges, birfs, diffs, u-joints, t-case and tranny etc. being taken up. Search on it and you'll learn more than you can imagine. Welcome sir :flipoff2: (Official mud salute.)

Michael.
 
Bienvenido!!! = Welcome!!! :flipoff2:Both mine do the clunk!:steer:
 
I've been told that the drive plates on the front hubs eventually get worn in the full time 4wd. Mine clunks also...when the diesel is finished going in, I'll probably swap in new Birfs and drive plates.

Congrats and welcome...hope there's cheap gas where you live...the 3FE likes to chug back the fuel, and nothing much happens when you step on the throttle either. :D
 
Back
Top Bottom