Transfer case options

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 12, 2021
Threads
1
Messages
2
Location
31204
Looking for transfer case options for my 76 FJ 40 I am currently running a Chevy create motor with a automatic transmission. My stock transfer case is whining so loud that’s is in bearable when driving at speed for any distance. I all of the bearings replaces but didn’t really get the results that I was hoping for ( I know that there noisy and will never be quite because of the rugged gear design etc.)
I use this vehicle as my daily driver and don’t really need any rock crawling abilities. I’ve looked at Advanced Adapter s Orin and Atlas options, but they appear better suited for off roading verses highway driving. Does anyone know of a chain driven transfer case that would have the offsets need for a FJ 40 that would possibly work for highway use with some occasional off-road use.
Any advice would be greatly appreciated

413CD4E3-DE93-4F1B-B461-710725A52D32.webp
 
I am guessing you have tried sound deadening the tub to reduce the noise - carpets or duramax. I also don’t know what weight transfer case oil you are using, but a heavier weight might help a bit.

What worked for me was pulling the V8 out and dropping in a complete engine and driveline from an FJ60. The split case is very quite. If there is an adapter from your Chevy engine to a Toyota split case, that would be a big improvement.
 
Assuming you are using the 4sp that came in your 40, your t-case options are a bit limited. Orion would be a good choice but it's the same design, so likely not quiet enough for you.

You could do a later 4sp with matching split case. Probably the easiest option as it's almost a bolt in. You lose the parking brake on the tcase, but that can be added back onto the split case.
 
Assuming you are using the 4sp that came in your 40, your t-case options are a bit limited. Orion would be a good choice but it's the same design, so likely not quiet enough for you.

You could do a later 4sp with matching split case. Probably the easiest option as it's almost a bolt in. You lose the parking brake on the tcase, but that can be added back onto the split case.


OP stated he has a V8 and automatic transmission. Which means anything but a one piece transfer case or Orion would require a different adapter. How quiet it is depends on the case itself since not all used transfer cases make the same noise. When I bought my 65 FJ45 the transfer case had a bad bearing. It has an early 2F with a floor shift three speed. I switched the transfer out with one that I bought used for $25. That cheap transfer case is the quietest one piece transfer case I have ever come across in all my years of owning 40 series. Plans for the 45 are either an H55F or H42 with a split case. Just hope the replacement will be as quiet.
 
Assuming you are using the 4sp that came in your 40, your t-case options are a bit limited. Orion would be a good choice but it's the same design, so likely not quiet enough for you.

You could do a later 4sp with matching split case. Probably the easiest option as it's almost a bolt in. You lose the parking brake on the tcase, but that can be added back onto the split case.
Thanks for your reply, I am running a 4 speed automatic transmission behind a smb Chevy 350 Engin. I am actually on my second 350 Engin and 4speed automatic tea mission. Just installed a Jasper create motor “GM 350” with throttle body injection. I am guessing my stock transfer case has something close to 400,000 miles on the gears, casing the high pitch whining when accelerating. Like I mentioned before I tried replacing the bearings but really didn’t improve the noise level.
 
Back
Top Bottom